Recent work

[lutonlagerlout]

think i paid about a ton for 4 ,shocked at how easy they cut the clays
got about 15 m chase in tarmac tomorrow,that will be the test
LLL

[Dave_L]

Plenty of water Tony

[Dave_L]

cheers for that, never keen on them guys selling out of a van

Know what you mean but when you get to know and trust one guy they're ok......

[lutonlagerlout]

no one legit sells stuff out of the back of motors nowdays dave
some sort of scam if thats the case
i think its the chippings that wreck the blade on tarmac
?
??
LLL

[London Stone Paving]

I remember when i first started scaping. I was approached by a guy in a van selling cheap diamond blades. When he told me the price I couldn't get my money out quick enough. Sounded too good to be true..it was, the blades were about as useful as a blunt knife. Learnt a lesson there.

[GB_Groundworks]

no one legit sells stuff out of the back of motors nowdays dave
some sort of scam if thats the case
i think its the chippings that wreck the blade on tarmac
?
??
LLL

really.....

[seanandruby]

Using a blade meant for concrete will make it wear out quicker. There are a lot of factors involved in cutting with blades that need to be taken into account, speed, dry/wet cutting diamonds wearing to fast before the matrix wears etc: Always use a blade for it's purpose ie, soft cutting ( tarmac, green concrete. ) or hard cutting like stone, concrete etc: You will get a longer working life from them if used with the correct materials.

[lutonlagerlout]

giles you are taking the peesh mate
I am talking unmarked pikey wagons and you know that
FTR the JCB blade went through15 M of 80mm of tarmac top and base in less than 10 minutes with very little blade wear
I do find that you can get good and bad blades even in the same batch from the same manufacturer
or maybe its my imagination?
this particular blade ,I am gonna spray it gold and hang it on the wall
cheers LLL

[bobbi o]

five jcb blades on ebay now at 20 pound each 3pound postage dylan

cheers for that.the man dropped them off today. a steal at 100 for 5. he said their not stolen and he can't get any more.

[GB_Groundworks]

giles you are taking the peesh mate

of course i am this is still the brew cabin isnt it?

in our floor saw we have different blades for different surfaces, asphalt blades have bigger gaps between the diamond sections if i recall

[lutonlagerlout]

forgot to add the :;):
LLL

[dig dug dan]

i often get a guy selling gloves. Seems genuine enough, has a landline number and an address, and the gloves are good. £10 for 12 pairs



Edited By dig dug dan on 1319122040

[Carberry]

I keep getting offered memory foam mattresses from eejits driving past. When working in a crappy area I have been offered power tools too.

[haggistini]

Pikeys pick them up from retail seconds outlets and drive arround with a dodgy logo on their shirt pretending that the company has sent out to many with no invoice??? Don't buy from a van as they might do the old switcharooo! On laptops and power tools!

[lutonlagerlout]

hopefully tomorrow will be ripoff on the 235m drive and paths we have been doing the last 3 weeks,might even get a chance to take some more pictures
was on the stihl today and used a whole 5 litres of juice,I dont count cuts but,reckon we marked and cut at least 400 all on curves
anyway while i was cutting i started thinking
and i realised it hasnt rained once during work hours in the last 3 weeks
sadly the spray from the stihl completely soaked my right leg and foot,partially compensating for hamstrings that feel as tight as a nun's
:;):
LLL