Recent work
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Site Admin
- Posts: 4732
- Joined: Fri Jul 28, 2006 8:47 pm
- Location: Somerset
- Contact:
Plenty of water Tony
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset
See what we get up to Our Facebook page
See what we get up to Our Facebook page
-
- Site Admin
- Posts: 4732
- Joined: Fri Jul 28, 2006 8:47 pm
- Location: Somerset
- Contact:
Know what you mean but when you get to know and trust one guy they're ok......digerjones wrote:cheers for that, never keen on them guys selling out of a van
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset
See what we get up to Our Facebook page
See what we get up to Our Facebook page
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Posts: 2199
- Joined: Mon May 10, 2010 1:07 pm
- Location: Surrey
- Contact:
-
- Site Admin
- Posts: 4420
- Joined: Sat Aug 09, 2008 3:55 pm
- Location: high peak
- Contact:
really.....lutonlagerlout wrote:no one legit sells stuff out of the back of motors nowdays dave
some sort of scam if thats the case
i think its the chippings that wreck the blade on tarmac
?
??
LLL
Giles
Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.
http://www.gbgroundworks.com
Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.
http://www.gbgroundworks.com
-
- Site Admin
- Posts: 4713
- Joined: Mon Jun 26, 2006 11:01 am
- Location: eastbourne
Using a blade meant for concrete will make it wear out quicker. There are a lot of factors involved in cutting with blades that need to be taken into account, speed, dry/wet cutting diamonds wearing to fast before the matrix wears etc: Always use a blade for it's purpose ie, soft cutting ( tarmac, green concrete. ) or hard cutting like stone, concrete etc: You will get a longer working life from them if used with the correct materials.
sean
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
giles you are taking the peesh mate
I am talking unmarked pikey wagons and you know that
FTR the JCB blade went through15 M of 80mm of tarmac top and base in less than 10 minutes with very little blade wear
I do find that you can get good and bad blades even in the same batch from the same manufacturer
or maybe its my imagination?
this particular blade ,I am gonna spray it gold and hang it on the wall
cheers LLL
I am talking unmarked pikey wagons and you know that
FTR the JCB blade went through15 M of 80mm of tarmac top and base in less than 10 minutes with very little blade wear
I do find that you can get good and bad blades even in the same batch from the same manufacturer
or maybe its my imagination?
this particular blade ,I am gonna spray it gold and hang it on the wall
cheers LLL
-
- Site Admin
- Posts: 4420
- Joined: Sat Aug 09, 2008 3:55 pm
- Location: high peak
- Contact:
of course i am this is still the brew cabin isnt it?lutonlagerlout wrote:giles you are taking the peesh mate
in our floor saw we have different blades for different surfaces, asphalt blades have bigger gaps between the diamond sections if i recall
Giles
Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.
http://www.gbgroundworks.com
Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.
http://www.gbgroundworks.com
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Posts: 2504
- Joined: Thu Jul 10, 2003 10:20 pm
- Location: hemel hempstead,herts. 01442 212315
i often get a guy selling gloves. Seems genuine enough, has a landline number and an address, and the gloves are good. £10 for 12 pairs
Edited By dig dug dan on 1319122040
Edited By dig dug dan on 1319122040
Dan the Crusher Man
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
-
- Posts: 1405
- Joined: Thu Sep 27, 2007 10:29 am
- Location: South Wales
- Contact:
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
hopefully tomorrow will be ripoff on the 235m drive and paths we have been doing the last 3 weeks,might even get a chance to take some more pictures
was on the stihl today and used a whole 5 litres of juice,I dont count cuts but,reckon we marked and cut at least 400 all on curves
anyway while i was cutting i started thinking
and i realised it hasnt rained once during work hours in the last 3 weeks
sadly the spray from the stihl completely soaked my right leg and foot,partially compensating for hamstrings that feel as tight as a nun's
:;):
LLL
was on the stihl today and used a whole 5 litres of juice,I dont count cuts but,reckon we marked and cut at least 400 all on curves
anyway while i was cutting i started thinking
and i realised it hasnt rained once during work hours in the last 3 weeks
sadly the spray from the stihl completely soaked my right leg and foot,partially compensating for hamstrings that feel as tight as a nun's
:;):
LLL