Concrete slotted posts ?? fencing

General banter, tradesmen, recommendations and warnings, surplus materials, humour and owt else!
thegardensurgery
Posts: 29
Joined: Wed May 16, 2007 5:41 pm
Location: stoke on trent
Contact:

Post: # 23217Post thegardensurgery

concrete slotted posts ?? fencing

can i ask......when you get your slotted post...you have two ends......the point end....and the flat end with a notch...which way is generaly the way to erect these...i have always done the old point end showing....but what is the the truth !! thanks guys

Edgecraft
Posts: 89
Joined: Sat Oct 06, 2007 3:41 pm
Location: Hyde, Cheshire
Contact:

Post: # 23218Post Edgecraft

Hi

It's down to personal choice, there is no right or wrong way, only the way you like it, although it's useful if you are trying to match posts that are already in situ.

That's what my old fella told me and he had a fencing business for thirty years, infact his old partner is still going and casts his own posts, base panels !

Regards

Darren
What do you mean you've changed your mind, i've already started !

Rich H
Posts: 884
Joined: Thu Feb 08, 2007 12:28 pm
Location: Reading

Post: # 23220Post Rich H

I don't use them unless a customer forces me too, then only with panels. Ripped out too many that have snapped at the base - rods rotted and concrete crumbled.

Anyway, back on topic, is perhaps the notch on the 'bottom' for a close board capping rail?

Mikey_C
Posts: 952
Joined: Mon Oct 30, 2006 8:24 pm
Location: Bournemouth, Dorset

Post: # 23221Post Mikey_C

Rich, if not concrete, what are you using?

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 23225Post lutonlagerlout

point goes up of course
and not sure what you mean about concrete posts rotting rich?
that only happens when wnackers cant be arsed to dig the hole deep enough and smash the bottom 9" off with a lump hammer
i have done feather edge and i have done slotted and imho slotted is better,and concrete posts and gravel boards are better still
i know it makes heavy work but i have never had a concrete post snap on me
theres always "www.supalitefencing.co.uk" for those who like a lighter load :)
i have had this arguments numerous times but no one can give me a definitive answer which is best, concrete or wood and why??
regards LLL
"what,you want paying today??"

YOUR TEXT GOES HERE

Dave_L
Site Admin
Posts: 4732
Joined: Fri Jul 28, 2006 8:47 pm
Location: Somerset
Contact:

Post: # 23226Post Dave_L

Concrete all the way. Have done loads inc my back yard, can't see them giving up for a long time yet!

/edit - pointy end up ;)




Edited By Dave_L on 1192655687
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset

See what we get up to Our Facebook page

dig dug dan
Posts: 2504
Joined: Thu Jul 10, 2003 10:20 pm
Location: hemel hempstead,herts. 01442 212315

Post: # 23228Post dig dug dan

plastic are stronger believe it or not. Try snapping a plastic post, then try a concrete one and see which gives up first!
Dan the Crusher Man
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"

matt h
Posts: 607
Joined: Mon Jul 09, 2007 11:14 pm
Location: gosport

Post: # 23231Post matt h

concrete posts have a longer lifespan than wooden ones, and are far more secure against high winds. Unless you are using greenheart that is! :D
general builder, maintenance engineer, gas and plumbing installations, extensions etc

Rich H
Posts: 884
Joined: Thu Feb 08, 2007 12:28 pm
Location: Reading

Post: # 23243Post Rich H

I reckon a 125x100mm pressure-treated timber post will take a lot of punishment.

Whenever I take out a fence with concrete posts a good push will usually snap the things at the base. Inside, I often find that moisture has got in and corroded the rods. Which is good, otherwise you've got to grind the buggers.

Image

DeckmanAdam
Posts: 75
Joined: Mon Jul 24, 2006 5:06 pm
Location: Chester

Post: # 23246Post DeckmanAdam

Im tuther way round mate whenever i take a wooden fence down it just takes a push to bring it down, i understand that these will probably have been put in when pressure treatments were not as common as today but still i would go with concrete long term and i think a closeboard panel with conc post and base panel looks great.
Point up for me too but alot do it with ball up.

James.Q
Posts: 368
Joined: Tue Sep 25, 2007 7:20 pm
Location: darwen
Contact:

Post: # 23251Post James.Q

its all down to customer choice but i find high end contracts timber . cheeper jobs concrete . something to do with asthetics
One of the symptoms of an approaching nervous breakdown is the belief that one's work is terribly important.

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 23255Post lutonlagerlout

generally speaking fences come down easier when they have not been erected right in the first place
the times i have found brick bats and sand chucked down the side of fenceposts is no ones business
i always use a semi dry concrete mix and always a minimun 600 below ground level
cheers LLL :)
"what,you want paying today??"

YOUR TEXT GOES HERE

Mikey_C
Posts: 952
Joined: Mon Oct 30, 2006 8:24 pm
Location: Bournemouth, Dorset

Post: # 23256Post Mikey_C

Having recently had to make a choice for my own fence I went for concrete, I did opt for a smooth cast finish to improve the aesthetics.

As for longevity I could not imagine a wood post, be it pressure treated, tantalized or soaked for weeks in some old non Health and safety approved creosote that I've got, out lasting concrete!

Finally, my posts were round at the bottom and 45 deg sloped at the top.

dig dug dan
Posts: 2504
Joined: Thu Jul 10, 2003 10:20 pm
Location: hemel hempstead,herts. 01442 212315

Post: # 23257Post dig dug dan

we are not legally allowed to lift a concrete post without another person now. health and safety gone mad again.
Dan the Crusher Man
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"

Tony McC
Site Admin
Posts: 8346
Joined: Mon Jul 05, 2004 7:27 pm
Location: Warrington, People's Republic of South Lancashire
Contact:

Post: # 23328Post Tony McC

Years and years ago, long before kerb-lifting aids, we worked on a heavily unionised site. My owld feller and meself were laying kerbs, one of us at each end, when the bolshie union rep came ambling over (he was never actually seen doing any work) and asked about the weight of the kerbs. Mr Bolshie then declares that according to union rules we must have a minimum of three men lifting each kerb.

"Where the flip are you going to put three men around a kerb?" I asked. We were thrown off the job within hours.

6 weeks later we were back laying the kerbs, one man at each end. Mr Bolshie and his chums had been sent to seek alternative employment at the Labour Exchange.
Site Agent - Pavingexpert

Post Reply