Concrete slotted posts ?? fencing
-
- Posts: 29
- Joined: Wed May 16, 2007 5:41 pm
- Location: stoke on trent
- Contact:
-
- Posts: 89
- Joined: Sat Oct 06, 2007 3:41 pm
- Location: Hyde, Cheshire
- Contact:
Hi
It's down to personal choice, there is no right or wrong way, only the way you like it, although it's useful if you are trying to match posts that are already in situ.
That's what my old fella told me and he had a fencing business for thirty years, infact his old partner is still going and casts his own posts, base panels !
Regards
Darren
It's down to personal choice, there is no right or wrong way, only the way you like it, although it's useful if you are trying to match posts that are already in situ.
That's what my old fella told me and he had a fencing business for thirty years, infact his old partner is still going and casts his own posts, base panels !
Regards
Darren
What do you mean you've changed your mind, i've already started !
-
- Posts: 884
- Joined: Thu Feb 08, 2007 12:28 pm
- Location: Reading
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
point goes up of course
and not sure what you mean about concrete posts rotting rich?
that only happens when wnackers cant be arsed to dig the hole deep enough and smash the bottom 9" off with a lump hammer
i have done feather edge and i have done slotted and imho slotted is better,and concrete posts and gravel boards are better still
i know it makes heavy work but i have never had a concrete post snap on me
theres always "www.supalitefencing.co.uk" for those who like a lighter load
i have had this arguments numerous times but no one can give me a definitive answer which is best, concrete or wood and why??
regards LLL
and not sure what you mean about concrete posts rotting rich?
that only happens when wnackers cant be arsed to dig the hole deep enough and smash the bottom 9" off with a lump hammer
i have done feather edge and i have done slotted and imho slotted is better,and concrete posts and gravel boards are better still
i know it makes heavy work but i have never had a concrete post snap on me
theres always "www.supalitefencing.co.uk" for those who like a lighter load
i have had this arguments numerous times but no one can give me a definitive answer which is best, concrete or wood and why??
regards LLL
-
- Site Admin
- Posts: 4732
- Joined: Fri Jul 28, 2006 8:47 pm
- Location: Somerset
- Contact:
Concrete all the way. Have done loads inc my back yard, can't see them giving up for a long time yet!
/edit - pointy end up
Edited By Dave_L on 1192655687
/edit - pointy end up
Edited By Dave_L on 1192655687
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset
See what we get up to Our Facebook page
See what we get up to Our Facebook page
-
- Posts: 2504
- Joined: Thu Jul 10, 2003 10:20 pm
- Location: hemel hempstead,herts. 01442 212315
plastic are stronger believe it or not. Try snapping a plastic post, then try a concrete one and see which gives up first!
Dan the Crusher Man
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
-
- Posts: 607
- Joined: Mon Jul 09, 2007 11:14 pm
- Location: gosport
-
- Posts: 884
- Joined: Thu Feb 08, 2007 12:28 pm
- Location: Reading
I reckon a 125x100mm pressure-treated timber post will take a lot of punishment.
Whenever I take out a fence with concrete posts a good push will usually snap the things at the base. Inside, I often find that moisture has got in and corroded the rods. Which is good, otherwise you've got to grind the buggers.
Whenever I take out a fence with concrete posts a good push will usually snap the things at the base. Inside, I often find that moisture has got in and corroded the rods. Which is good, otherwise you've got to grind the buggers.
-
- Posts: 75
- Joined: Mon Jul 24, 2006 5:06 pm
- Location: Chester
Im tuther way round mate whenever i take a wooden fence down it just takes a push to bring it down, i understand that these will probably have been put in when pressure treatments were not as common as today but still i would go with concrete long term and i think a closeboard panel with conc post and base panel looks great.
Point up for me too but alot do it with ball up.
Point up for me too but alot do it with ball up.
-
- Posts: 368
- Joined: Tue Sep 25, 2007 7:20 pm
- Location: darwen
- Contact:
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Posts: 952
- Joined: Mon Oct 30, 2006 8:24 pm
- Location: Bournemouth, Dorset
Having recently had to make a choice for my own fence I went for concrete, I did opt for a smooth cast finish to improve the aesthetics.
As for longevity I could not imagine a wood post, be it pressure treated, tantalized or soaked for weeks in some old non Health and safety approved creosote that I've got, out lasting concrete!
Finally, my posts were round at the bottom and 45 deg sloped at the top.
As for longevity I could not imagine a wood post, be it pressure treated, tantalized or soaked for weeks in some old non Health and safety approved creosote that I've got, out lasting concrete!
Finally, my posts were round at the bottom and 45 deg sloped at the top.
-
- Posts: 2504
- Joined: Thu Jul 10, 2003 10:20 pm
- Location: hemel hempstead,herts. 01442 212315
we are not legally allowed to lift a concrete post without another person now. health and safety gone mad again.
Dan the Crusher Man
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
-
- Site Admin
- Posts: 8346
- Joined: Mon Jul 05, 2004 7:27 pm
- Location: Warrington, People's Republic of South Lancashire
- Contact:
Years and years ago, long before kerb-lifting aids, we worked on a heavily unionised site. My owld feller and meself were laying kerbs, one of us at each end, when the bolshie union rep came ambling over (he was never actually seen doing any work) and asked about the weight of the kerbs. Mr Bolshie then declares that according to union rules we must have a minimum of three men lifting each kerb.
"Where the flip are you going to put three men around a kerb?" I asked. We were thrown off the job within hours.
6 weeks later we were back laying the kerbs, one man at each end. Mr Bolshie and his chums had been sent to seek alternative employment at the Labour Exchange.
"Where the flip are you going to put three men around a kerb?" I asked. We were thrown off the job within hours.
6 weeks later we were back laying the kerbs, one man at each end. Mr Bolshie and his chums had been sent to seek alternative employment at the Labour Exchange.
Site Agent - Pavingexpert