Recent work

[lutonlagerlout]

I would say for a high end job like that the 2 part resin all the way
as you say weather is going wonky for sand cement pointing

cheers LLL

[DempseyLiverpool]

Cheers lads. Customer not gonna foot the bill for the resin. Anyone know where I could hire a belt cleaner from ? Liverpool or surrounding area.

Cheers

[RAPressureWashing]

Top looking job mate

[John156]

Very tidy work Dempsey

[DempseyLiverpool]

Cheers lads

[mickg]

give Parex a ring at Chorley Tel: 01257 224900

not called into their place for a few years, they used to have one not sure if they still do

other than that I could not find one in the north west for hire

Steintec sell new and used pergo cleaners

[cookiewales]

very nice work there ashley steintec hire them out .you could do what i do top up joints with slurry mix 3.5 to1 sharp sand cement strong mix flows better top up to 10 mm from top then use romex d1 two part @£39 PER 25KG PORTION from Cowley stone you would probley get 6 m2 give me a call if you want more info

[DempseyLiverpool]

Thanks Mick/Cookie, much appreciated. Will post up when all done.

Cheers

[sy76uk]

Nice work Dempsey. That look's very nice mate.

I just finished a patio today in teakwood sandstone. I used weather point on it and it looks ok. I think a proper sand cement mix would look better on what your doing though.

Updated the facebook https://www.facebook.com/Sampaving

[DempseyLiverpool]

Cheers sy. Nice job mate looks smart. Never seen that stone before.

[lutonlagerlout]

excellent job sy
I note with interest you cutting the *flags* with a hand saw

theres soft and then theres teak a misnamed flag is ever there was one :;):

looks beautiful though

LLL

[sy76uk]

Nice one Dempsy and Tony. It's the first time I'd ever used the stuff and TBH it's a nice stone to work with. As Tony said, it is quite soft (I could have cut it with a handsaw but opted for a 4" grinder instead lol) but I only had 2 break on me from 70m2.
Not a bad price at £25 per m2 either.

The clients really happy with it but I think I've still got a little way to go before I start producing natural stone work to the standard of some of the stuff I see on these pages.

[lutonlagerlout]

looks bang on to me fella
LLL

[seanandruby]

I know the thermalite block hand saw has wider cutting teeth but i wonder if that gives a neat cut? i'll take mine to work and try it on some soft stone.

[sy76uk]

Cheers Tony.

That stone was only 20mm thick Sean so I used a 4" grinder with a very narrow cutting disc.
The funny thing was I, was using my workmate and g clamps for cutting so with the stuff looking like planks of timber and even the dust coming off it looking like saw dust it felt pretty much like I was working with timber lol.

The picture was just a joke for my facebook page.