Page 1 of 1

Posted: Sun Jun 22, 2008 4:32 pm
by Millse
Advice please. Following recent deluges from the usual wonderful summer weather we get here, some localised areas of my patio DTP are spongy (surprise). I have laid DTP in layers of not more than 75mm and the sub grade below is fairly solid.

My question is do I just leave to dry out before laying the flags or get more DTP and compact with the wacker again and protect with a tarp? Thanks. :(

Posted: Sun Jun 22, 2008 5:05 pm
by seanandruby
leave to dry out. it wont hurt to cover if you have one but only when rain is imminent

Posted: Sun Jun 22, 2008 5:12 pm
by Millse
Thanks Sean. Guess as with everybody patience is a virtue in this wet country! I have a tarp so I'll cover if it can dry a bit. Thanks again. :)