The Brew Cabin

Posted: **Sun Oct 02, 2005 10:19 am**

[URL=[URL=http://img396.imageshack.us/my.php?imag ... 3020gl.jpg]

I want to pave were the concrete is, it goes under the brick to the inside, as it was a path, i put the door in, how would i brake up the concrete as not to damage under the brick, and would i just make good after it was done?

cheers

Posted: **Sun Oct 02, 2005 6:18 pm**

I can't make out that photo - too small on my screen - but would it be possible to put a saw cut in front of the brickwork and then jackhammer the concrete?

Posted: **Mon Oct 03, 2005 12:55 pm**

www.cott99.karoo.net Might be a better pic

Posted: **Wed Oct 05, 2005 12:26 am**

Yep - use a nangle grinder to put a cut in as close to the masonry as poss.

Posted: **Wed Oct 05, 2005 2:36 pm**

Cheers, would i make good under the brick first, after cutting the concrete, with a concrete mix? then pave up to it

cheers

Posted: **Mon Oct 10, 2005 9:04 pm**

There shouldn't be anything to make good under the masonry, if the cut is made in the correct position and the concrete breaks off cleanly.

The Brew Cabin

Brake up some concrete