Brake up some concrete

[mrcw]

[URL=[URL=http://img396.imageshack.us/my.php?imag ... 3020gl.jpg]

I want to pave were the concrete is, it goes under the brick to the inside, as it was a path, i put the door in, how would i brake up the concrete as not to damage under the brick, and would i just make good after it was done?

cheers

[Tony McC]

I can't make out that photo - too small on my screen - but would it be possible to put a saw cut in front of the brickwork and then jackhammer the concrete?

[mrcw]

www.cott99.karoo.net Might be a better pic

[Tony McC]

Yep - use a nangle grinder to put a cut in as close to the masonry as poss.

[mrcw]

Cheers, would i make good under the brick first, after cutting the concrete, with a concrete mix? then pave up to it

cheers

[Tony McC]

There shouldn't be anything to make good under the masonry, if the cut is made in the correct position and the concrete breaks off cleanly.