Notching - Best method of notching limestone

Patio flagstones (slabs), concrete flags, stone flags including yorkstone and imported flagstones.
Post Reply
bwatman
Posts: 3
Joined: Fri Jun 26, 2020 6:17 pm
Location: Downham Market

Post: # 119198Post bwatman

In my proposed paving area I have x5, 50mm x 50mm metal fencing posts.

I am laying 20mm Limestone slabs and would like your expert opinion on how best to notch out the slabs to go around the posts without looking like a pigs ear.

I can cut down each side of the notch but how do I cleanly cut the cross
face?

I am using a cutting 300mm disc for general cutting.
Don Newton
Top
Tony McC
Site Admin
Posts: 8346
Joined: Mon Jul 05, 2004 7:27 pm
Location: Warrington, People's Republic of South Lancashire
Contact:
Contact Tony McC

Post: # 119219Post Tony McC

You will certainly benefit from a smaller disc for the cross-piece cut.

Read this page: https://www.pavingexpert.com/cut_in04
Site Agent - Pavingexpert
Top
Post Reply

Return to “Flags and Slabs”