The Brew Cabin

Posted: **Thu Jun 25, 2020 9:40 am**

Hi Guys

I am laying some 1200x600 20mm porcelain on a concrete sub base with Bal one flex adhesive. Im just over half way. Torrential rain might be on the way. Any idea if the job will be ok if it gets wet (adhesive has set) but its not grouted.

I could stop laying and grout what I have done, but would have preferred to grout at the end all in one.

Cheers Rog

Posted: **Fri Jun 26, 2020 1:51 pm**

It should be OK if the adhesive has set.

Although it would be better if it had been grouted, it's not the end of the world if there's a bit of a delay between laying and grouting.

The Brew Cabin

Porcelain on concrete - rain help