Porcelain on concrete - rain help

Patio flagstones (slabs), concrete flags, stone flags including yorkstone and imported flagstones.
Post Reply
rog107
Posts: 3
Joined: Sat Oct 26, 2019 2:44 pm
Location: nuneaton

Post: # 118988Post rog107

Hi Guys

I am laying some 1200x600 20mm porcelain on a concrete sub base with Bal one flex adhesive. Im just over half way. Torrential rain might be on the way. Any idea if the job will be ok if it gets wet (adhesive has set) but its not grouted.

I could stop laying and grout what I have done, but would have preferred to grout at the end all in one.

Cheers Rog
Top
Tony McC
Site Admin
Posts: 8346
Joined: Mon Jul 05, 2004 7:27 pm
Location: Warrington, People's Republic of South Lancashire
Contact:
Contact Tony McC

Post: # 118994Post Tony McC

It should be OK if the adhesive has set.

Although it would be better if it had been grouted, it's not the end of the world if there's a bit of a delay between laying and grouting.
Site Agent - Pavingexpert
Top
Post Reply

Return to “Flags and Slabs”