Posted: Sat Jun 04, 2005 8:46 pm
I intend to lay paving slabs on a 40 mm - 10 washed sand / 1 cement bed in accordance with the advice on this site.
I would be grateful if someone would advise me whether ordinary portland cement (OPC) or masonary cement (Mastercrete) should be used for this work.
I note that there is some concern regarding slabs moving or rocking. Would a coat of PVA on the back of the slab help prevent this?
Many thanks.
I would be grateful if someone would advise me whether ordinary portland cement (OPC) or masonary cement (Mastercrete) should be used for this work.
I note that there is some concern regarding slabs moving or rocking. Would a coat of PVA on the back of the slab help prevent this?
Many thanks.