Page 1 of 1

Posted: Tue Mar 01, 2005 10:48 am
by Telf
Hi all.

I am about to embark on a relatively large garden project and would really appreciate some advice. I will be laying a circular patio (2.85m) and approximately 25 square metres of paving/paths. The paving and patio is Indian Sandstone.

Any response to the following questions would be greatly appreciated.

- Once the ground has been leveled and the patio area etc mapped out, i shall be laying a base of hardcore. Should I lay a bed of sand on top of the hardcore and if so, how much would I need to order for the area i will be working with? ( the hardcore will come from all the old concrete paths that are being removed from the garden and crushed).

- What sort of mortar mix should I use for this type of job? There wont be any heavy traffic but the paths etc will be used fairly often.

- How should I go about grouting once the slabs are laid? Should I use a dry concrete mix as the slabs are a fairly light colour and may get stained quite easily.

Any help and further advice would be great. My wife and Ground Force have a lot to answer for!!! ??? :)

Posted: Wed Mar 02, 2005 10:47 pm
by James C
All these questions and more are answered on the main website Telf. :) James

Posted: Wed Mar 09, 2005 2:04 pm
by Tony McC
There's a whole page devoted to laying Imported Stone Flags ....

http://www.pavingexpert.com/stonpv03.htm