Page 1 of 1
Posted: Thu Feb 10, 2005 1:00 pm
by Beardownman
I have to build a circular patio of approx' 7.5 M in diameter. Mosts kits i have seen are a maximum of 4M.
Would buying extra outer rings and laying at intervals in between square slabs help, or is the only way over this problem by cutting the rest?
Posted: Thu Feb 10, 2005 3:59 pm
by Tony McC
Depends very much on the type of flags being laid. With some rnages, you can extend cicrles by creating outer rings of smaller flags, let's say a 300x300 or a 450x300mm, and then, as the radius increases, you can use progressively larger flags without reaching a point where joint width becomes excessive.
Do you know which flags you plan to use?
Posted: Thu Feb 10, 2005 4:08 pm
by Beardownman
Not as yet. Waiting for customer too choose
Posted: Thu Feb 10, 2005 8:09 pm
by ABILITY
Check out Westminster stone range of re-pro flags. To my knowledge they do the largest dia. circle kit available, as far as I can remember at least to 21' so pretty close to your requirement.
Available in a range of colours.
Link available from suppliers page.