The Brew Cabin

Posted: **Sat Jul 24, 2004 10:01 am**

I have an MOT base and would like to know if I should just bed them on sand, dry mix or by using 5 blobs of morter(as by the marks on the backs, they were layed before) ?

Novice wanting to best reduce the risk of a bad back :o

Posted: **Sat Jul 24, 2004 10:31 am**

Have a look at this page:-
http://www.pavingexpert.com/layflag1.htm

Steve Rogers

Posted: **Tue Jul 27, 2004 1:37 pm**

The best way of avoiding a sore arse is not to use spot bedding - I've been known to kick prone backsides when I see spot bedding being used!

Follow the link Steve gave above. :)

Posted: **Tue Jul 27, 2004 4:04 pm**

Yes, thanks steve for the link, very helpful site.

The Brew Cabin

Old 3x2's - Best way of laying