Posted: Mon Jul 05, 2004 8:46 pm
The patio I am building slopes towards a drain in a circular fashion (making a very shallow half cone, the slope is 1:60)
I have put down a 2" bed of 1/2" to dust onto the clay base and plan to lay 1" of sharp sand on top of this, compact then screed.
This is where my question lies, I was planning on laying out screeding rails in a 'fan' pattern radiating from the drain. However this will leave me with v's between each section. Will this cause me a problem when I come to lay the slabs?
The patio is going to be used for light traffic only.
I have put down a 2" bed of 1/2" to dust onto the clay base and plan to lay 1" of sharp sand on top of this, compact then screed.
This is where my question lies, I was planning on laying out screeding rails in a 'fan' pattern radiating from the drain. However this will leave me with v's between each section. Will this cause me a problem when I come to lay the slabs?
The patio is going to be used for light traffic only.