Need a bit of stainless steel

For the discussion of hand tools, power tools, operated and non-operated plant, and all sorts of kit associated with the paving and drainage trades
Post Reply
Forestboy1978
Posts: 1000
Joined: Sun Oct 23, 2011 9:57 am
Location: southampton, hampshire

Post: # 109981Post Forestboy1978

Basically the customer wants their driveway gates to open inwards past 90 degrees.

Only way to acheive this without moving the posts or buying bigger gate is to fit the hinges diagonally through the posts. Not too big a deal but this now means the gate sit atop a driveway drainage gulley and drop bolts wont obviously drop.

Can't cut the gulley to accomodate drop bolts or I'd be shearing through the slats in the gulley and they'd bend under load so I need to replace the top of the central gulley with sheet metal of some description.

https://www.dropbox.com/sh....3a?dl=0

Any ideas?

Ta
Top
michaelthegardener
Posts: 638
Joined: Sat Jul 17, 2010 8:20 am
Location: bristol

Post: # 109983Post michaelthegardener

why do they want that anyway ? how thick is the top of the gully ? what about bolting a bit of steel to the underside of it then making some holes for the bolts
Top
dig dug dan
Posts: 2504
Joined: Thu Jul 10, 2003 10:20 pm
Location: hemel hempstead,herts. 01442 212315

Post: # 109984Post dig dug dan

If they only need to open one way, why did you bolt between the posts instead of behind? Bolting them behind means they will open fully inwards, and your dropbolt will avoid the channel. Simples
Dan the Crusher Man
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
Top
Forestboy1978
Posts: 1000
Joined: Sun Oct 23, 2011 9:57 am
Location: southampton, hampshire

Post: # 109985Post Forestboy1978

michaelthegardener wrote:why do they want that anyway ? how thick is the top of the gully ? what about bolting a bit of steel to the underside of it then making some holes for the bolts

Good idea michael. Thanks I think I'll use that.

And to your question.... cos they do
Top
Forestboy1978
Posts: 1000
Joined: Sun Oct 23, 2011 9:57 am
Location: southampton, hampshire

Post: # 109986Post Forestboy1978

dig dug dan wrote:If they only need to open one way, why did you bolt between the posts instead of behind? Bolting them behind means they will open fully inwards, and your dropbolt will avoid the channel. Simples
Cos that's what I quoted for. I wanted and they wanted it all linear. There wasn't any mention from them or in my quote that they would open beyond 90 degrees. It just didn't occur to me that it'd be a problem as the driveway is easily large enough not to need it.

A lesson learnt.....
Top
lutonlagerlout
Site Admin
Posts: 15182
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 109988Post lutonlagerlout

I think people automatically assume that gates will open 180 degrees, that looks a tidy job. to my mind they are just being pedantic.
however more detail for the quote next time !
LLL :)
"what,you want paying today??"

YOUR TEXT GOES HERE
Top
Forestboy1978
Posts: 1000
Joined: Sun Oct 23, 2011 9:57 am
Location: southampton, hampshire

Post: # 110007Post Forestboy1978

lutonlagerlout wrote:I think people automatically assume that gates will open 180 degrees, that looks a tidy job. to my mind they are just being pedantic.
however more detail for the quote next time !
LLL :)
Yes, more admin. I love it..... lol

Anyone know where I could get x2 bradstone rumbled autumn gold block pavers to repair this driveway?

Yes, just two lol
Top
Forestboy1978
Posts: 1000
Joined: Sun Oct 23, 2011 9:57 am
Location: southampton, hampshire

Post: # 110008Post Forestboy1978

found them,, I think.

Ta
Top
Tony McC
Site Admin
Posts: 8346
Joined: Mon Jul 05, 2004 7:27 pm
Location: Warrington, People's Republic of South Lancashire
Contact:
Contact Tony McC

Post: # 110029Post Tony McC

Landscape World in Widnes - what Chris *hasn't* got lurking in that yard isn't worth laying!

Bits and pieces from almost every manufacturer and distributor in Britain.
Site Agent - Pavingexpert
Top
Forestboy1978
Posts: 1000
Joined: Sun Oct 23, 2011 9:57 am
Location: southampton, hampshire

Post: # 110040Post Forestboy1978

Thanks Tony. Noted :)
Top
Post Reply

Return to “Tools and Plant”