Hello!
I’m hoping for some advice about how high I can have an area of block paving I’m laying outside my house.
The wall has airbricks, the top of which are 150mm below the DPC (which is about 60 below internal floor level). The paving will slope away from the house, but ideally I’d like the level to be flush with the top of the airbricks (or even a little higher).
I was planning on creating a 200mm wide channel of gravel along the wall - presumably I can’t cover the airbricks with gravel, but if I create a space around the vent so it’s got 200mm free in front and its open upwards would that do the job, or do I need to suck it up and excavate 200mm below the vent so the paving ends up flush with the bottom of the airbrick?
Thanks!
Ross
Advise on paving height around airbricks
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Posts: 17
- Joined: Sun Jun 15, 2014 7:51 pm
- Location: Fife
-
- Site Admin
- Posts: 8346
- Joined: Mon Jul 05, 2004 7:27 pm
- Location: Warrington, People's Republic of South Lancashire
- Contact: