Posted: Sun May 18, 2008 4:17 pm
Can I lay a block paving onto an existing concrete drive using the drive as the rigid base layer with the sand on top of it.It is slightly sloping and will have one car running on and off it.
The Brew Cabin
Paving, Drainage and Hard-landscaping in Britain and Ireland
https://ext.pavingexpert.com/brewcabin/
Block paving onto an existing concrete drive
https://ext.pavingexpert.com/brewcabin/viewtopic.php?t=12296
Page 1 of 1
Posted: Sun May 18, 2008 6:57 pm
Posted: Sun May 18, 2008 10:18 pm
no, not really.
if you want to use an existing rigid base your top must be rigid construction too i.e. laid on cementious bedding
better to rip it out and get the levels right
cheers LLL
if you want to use an existing rigid base your top must be rigid construction too i.e. laid on cementious bedding
better to rip it out and get the levels right
cheers LLL