Driveway Pavers in Mortar???

All forms of block paving, brick paving, flexible or rigid, concrete or clays, new construction or renovation
Post Reply
100-1093880205

Post: # 1968Post 100-1093880205

I have a new home, with no driveway at all yet. I want to install pavers and would like to know if it is best to install them on crushed rock & sand or in mortar on top of a lowered cement driveway?
Thanks!

84-1093879891

Post: # 1971Post 84-1093879891

You don't give your location, but from your email address, It seems that you're not in the UK or Ireland, so what follows might not be applicable.

Over here, on these soggy but pleasant islands, the most common construction is the flexible bedding, what you describe as 'crushed rock and sand', and I know the same constructioon is used in other parts of the world, even those experiencing problems with frost heave. Rigid bedding (laying on mortar over a concrete base) is much harder work, more expensive and requires bricks specifically manufactured for that type of construction and so tends not to be used for residential driveways unless there is a specific reason to do so.

I'd hazard an educated guess and say that flexible bedding is the way to go with your project.

100-1093880205

Post: # 1972Post 100-1093880205

Thanks, I'm in El Paso, Texas, USA. It is very hot & dry weather here. Would there be any advantage to setting the pavers in mortar?

84-1093879891

Post: # 1977Post 84-1093879891

None that I can think of, but you may be better off asking a US-based contractor. I've seen dozens of case studies of flexible paving in the US, inclusing some in hot/dry areas, and there doesn't appear to be any problems.

Post Reply