Chainsaw - Conifer hedge
-
- Posts: 40
- Joined: Fri Feb 18, 2005 1:19 pm
- Location: England
- Contact:
-
- Posts: 2504
- Joined: Thu Jul 10, 2003 10:20 pm
- Location: hemel hempstead,herts. 01442 212315
Get some chainsaw protective Bib and brace. If the chainsaw comes into contact with it, it stops it dead. Saves you really injuring youselfs.
You will also want a hard hat with built in ear defenders and visor, and some chainsaw gloves.
If you are hiring the saw, They should have a safety kit comprising of all these things included
If you are topping a hedge, Make sure you have a good footing.
Also, in between cuts, apply the safety brake to the saw.
Never use the saw one handed, and wathc out for obstructions hidden within the hedge, such as old chain-link posts!
I hope this helps
(no broken sympathy meters needed here)
You will also want a hard hat with built in ear defenders and visor, and some chainsaw gloves.
If you are hiring the saw, They should have a safety kit comprising of all these things included
If you are topping a hedge, Make sure you have a good footing.
Also, in between cuts, apply the safety brake to the saw.
Never use the saw one handed, and wathc out for obstructions hidden within the hedge, such as old chain-link posts!
I hope this helps
(no broken sympathy meters needed here)
Dan the Crusher Man
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
-
- Posts: 40
- Joined: Fri Feb 18, 2005 1:19 pm
- Location: England
- Contact:
I read that if the nose of the bar comes into contact, with a branch, it can cause kick back, does that mean, just the nose, not as i will be topping the hegde with all of the bar, I should be ok, as the nose will have to contact with the hedge, the chainsaw is mine, never used, i will be using a good footing, and getting some gloves,
Cheers
Cheers
-
- Posts: 68
- Joined: Sat Sep 24, 2005 4:53 pm
- Location: Kent
- Contact:
Hi Labourer,
I know that this reply is a bit late! Had you used a chainsaw before and how did you get on? Reducing a conifer hedge is not really the best way of practicing!
The main problem with this type of hedge, particularly with larger hedges is small stubby sticks or branches flicking the chain off.
I know that this reply is a bit late! Had you used a chainsaw before and how did you get on? Reducing a conifer hedge is not really the best way of practicing!
The main problem with this type of hedge, particularly with larger hedges is small stubby sticks or branches flicking the chain off.
-
- Site Admin
- Posts: 8346
- Joined: Mon Jul 05, 2004 7:27 pm
- Location: Warrington, People's Republic of South Lancashire
- Contact:
Reminds me of when I worked on a certain garden makeover website some years ago. Somebody posted in to ask at what height they should trim their Leylandii hedge, and the bloke responsible for answering the trees & shrubs questions replied, "About three inches above ground level"
Site Agent - Pavingexpert
-
- Posts: 30
- Joined: Tue May 13, 2003 3:32 pm
- Location: North Wales
rms wrote:Hi Labourer,
I know that this reply is a bit late! Had you used a chainsaw before and how did you get on? Reducing a conifer hedge is not really the best way of practicing!
The main problem with this type of hedge, particularly with larger hedges is small stubby sticks or branches flicking the chain off.
If stubby branches are flicking off your chain, then it is too slack and REALLY dangerous.
I would advise all chainsaw users to get a basic chainsaw safety certificate, before using one.
-
- Posts: 2504
- Joined: Thu Jul 10, 2003 10:20 pm
- Location: hemel hempstead,herts. 01442 212315
Quite right
It is actually illegal for any contractor to use a chainsaw without a certificate, and if an accident were to occur, then health and safety will come down hard
The average man on the street doing his own garden work does not need one , even though they are more likely to do themsleves damage
one rule for one and another for someone else!
It is actually illegal for any contractor to use a chainsaw without a certificate, and if an accident were to occur, then health and safety will come down hard
The average man on the street doing his own garden work does not need one , even though they are more likely to do themsleves damage
one rule for one and another for someone else!
-
- Posts: 68
- Joined: Sat Sep 24, 2005 4:53 pm
- Location: Kent
- Contact: