London stone catchup - Few photos
-
- Posts: 2199
- Joined: Mon May 10, 2010 1:07 pm
- Location: Surrey
- Contact:
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Posts: 861
- Joined: Wed Feb 27, 2008 9:30 pm
- Location: SE London/ NW Kent
-
- Posts: 2199
- Joined: Mon May 10, 2010 1:07 pm
- Location: Surrey
- Contact:
I started to do a post and my computer threw a bit of a benny. Bob A, they are all suitable for driveways but the sandstone will definately pick up more tyre marks than the granite.London Stone Paving wrote:ok
We have not quite finished but its getting closer now. London Stone is a strange company, with some things we are very quick but other things drag on for ages
steps are clear buff Yorkstone, long edge bull nosed
We have had this wall cladding for a couple of years now and its never really moved, however I think we just need to make more of an effort to market it, anyway we have decided to persevere with it for a bit longer
We are going to pave the top area in Portland stone and are leaving a bed around the outside. The MOT is our own crushed stone
The slate water has been rebuilt using solid concrete blocks (no lights this time LLL) and the paving on the steps is one of our new grey yorkstones
We have built this mini display of granite setts. Pointed up with easyjoint. Despite us absolutely soaking the paaving it has still left a residue as can be seen from the photos. It will go after a while, but wouldnt fancy telling a client that
-
- Posts: 2199
- Joined: Mon May 10, 2010 1:07 pm
- Location: Surrey
- Contact:
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
the wall cladding i have seen in a 5 star hotel in an atrium and it looked really effective,i thought it was off cuts
patio is looking fine steve but you know what I and every other OCD fecker on here has picked up on straight away?
dont you :laugh:
did you have no gaffer tape when you did the easijoint?
cheers LLL
patio is looking fine steve but you know what I and every other OCD fecker on here has picked up on straight away?
dont you :laugh:
did you have no gaffer tape when you did the easijoint?
cheers LLL
-
- Posts: 196
- Joined: Fri Jun 17, 2011 10:49 pm
- Location: Romford Essex
Steve I put a client onto you in the week enquiring about granite flags from wickford Essex. Is it true you have to use a white cement to lay them should I use sharp sand or soft the bed will be 40mm max and finally do I have to use an outdoor tile grout would this stain the surface ? these are all things I have heard as I have never layed this before thanks in advance danny.
Think paving, think pink!
-
- Posts: 2504
- Joined: Thu Jul 10, 2003 10:20 pm
- Location: hemel hempstead,herts. 01442 212315
got to finish my raised shed base tomorrow, with some flags delivered from london stone.
Going to try that easijoint stuff, as gaps are 8mm
Will let you all know how it goes
Going to try that easijoint stuff, as gaps are 8mm
Will let you all know how it goes
Dan the Crusher Man
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
-
- Posts: 2199
- Joined: Mon May 10, 2010 1:07 pm
- Location: Surrey
- Contact:
Cheers Danny, I wouldn't bother with the white cement. I know some people do use it and also some paving suppliers recommend it but IMO its unecessary for granite. We are considering starting to recommend white cement for sawn sandstone but, obviously sawn sandstone apart from a couple of exceptions is a lot more porous than graniteThepinkpavingco wrote:Steve I put a client onto you in the week enquiring about granite flags from wickford Essex. Is it true you have to use a white cement to lay them should I use sharp sand or soft the bed will be 40mm max and finally do I have to use an outdoor tile grout would this stain the surface ? these are all things I have heard as I have never layed this before thanks in advance danny.
I would stick with easipoint fort the grouting. Whatever you decide to use, wipe off with a sponge as you go because the granite is flame textured and easipoint/grout can get stuck in the grain
Steve
-
- Posts: 2199
- Joined: Mon May 10, 2010 1:07 pm
- Location: Surrey
- Contact:
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Posts: 2199
- Joined: Mon May 10, 2010 1:07 pm
- Location: Surrey
- Contact:
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire