Saw advice please

For the discussion of hand tools, power tools, operated and non-operated plant, and all sorts of kit associated with the paving and drainage trades
Wills gardens
Posts: 91
Joined: Sun Jan 10, 2010 5:32 pm
Location: Ashford, Kent

Post: # 80568Post Wills gardens

Right so its finally time for us to buy a saw as I do not want to cut anything with a dry grinder this year.

So stihl seems to be the way, 400 or 410? Have hired 400 before and it seemed ok but the 410 looks a little better?

Used ones be a good buy or save a little more and buy a new one?

Pablo
Posts: 1990
Joined: Sun Mar 25, 2007 10:49 pm
Location: N/Ireland

Post: # 80572Post Pablo

I have 2 410's and they're feckin nightmares neither is more than a year old and both are giving me the same hassle. They're becoming hard to start easily flooded and the mechanism for turning the motor when you pull the rip cord keeps seizing. They've been well looked after and serviced recently and the fuel is perfect every time they're just not as well made as the previous models. I've had huskies before that and I'll be going back over to them they're easier to use more eronomic given that your hands aren't so close together the throttle doesn't cause hand fatigue on long cuts and they're easier started and more simple all round and cheaper.
Can't see it from my house

GB_Groundworks
Site Admin
Posts: 4420
Joined: Sat Aug 09, 2008 3:55 pm
Location: high peak
Contact:

Post: # 80573Post GB_Groundworks

410 if budget allows or 400, im back on the 400 after 410 was stolen, although 400 is rock solid 410 has had some problems with filters etc

heard very good things about the husqavana saws but not used one
Giles

Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.

http://www.gbgroundworks.com

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 80574Post lutonlagerlout

stihl all the way
400s are getting old now,although great saws ,they have a life span we just had a new piston etc in one of ours and cost 200 quid
in retrospect should have just bought a 410
i would go new,as you never know what mix someone else has been running it on
we use a dedicated 5 litre can,which we add 100ml of stihl 2 stroke oil to ,when it is filled with exactly 5 litres
cures problems before they start
LLL
"what,you want paying today??"

YOUR TEXT GOES HERE

Wills gardens
Posts: 91
Joined: Sun Jan 10, 2010 5:32 pm
Location: Ashford, Kent

Post: # 80576Post Wills gardens

so new and go 410 you guys think? Best oil to mix with?

GB_Groundworks
Site Admin
Posts: 4420
Joined: Sat Aug 09, 2008 3:55 pm
Location: high peak
Contact:

Post: # 80578Post GB_Groundworks

stilh sell oil in a squeeze bottle with a 100ml reservoir at the top like those plasticers, you squeeze it fill the 100ml then add it to your petrol we have a few cans on the go mix is always important, but always better to have more oil than less. yes smokes more but less chance of scouring a piston,

never leave brick layers with a neat petrol can for mixer and a mix can for saw they'll get them the wrong way rd and kill your saw and make your mixer smoke like a chimney haha
Giles

Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.

http://www.gbgroundworks.com

Carberry
Posts: 1366
Joined: Fri Apr 15, 2011 9:05 pm
Location: Edinburgh

Post: # 80580Post Carberry

Pablo wrote:I have 2 410's and they're feckin nightmares neither is more than a year old and both are giving me the same hassle. They're becoming hard to start easily flooded and the mechanism for turning the motor when you pull the rip cord keeps seizing. They've been well looked after and serviced recently and the fuel is perfect every time they're just not as well made as the previous models. I've had huskies before that and I'll be going back over to them they're easier to use more eronomic given that your hands aren't so close together the throttle doesn't cause hand fatigue on long cuts and they're easier started and more simple all round and cheaper.
I'm in same boat with my 410 and it is doing my box in, temperamental f*cking thing.

As for oil, I just bought a 25L container of 2 stroke, should last me a lifetime. I get oil cheap by the pallet load because I sell it on.

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 80581Post lutonlagerlout

i have the opposite problems with ground workers giles :;):
looks like a reconditioned 400 may be the answer
LLL
"what,you want paying today??"

YOUR TEXT GOES HERE

Wills gardens
Posts: 91
Joined: Sun Jan 10, 2010 5:32 pm
Location: Ashford, Kent

Post: # 80583Post Wills gardens

damn im confused now as its late as well. guess its ebay time really or maybe go rent a 410 see what there like

Dave_L
Site Admin
Posts: 4732
Joined: Fri Jul 28, 2006 8:47 pm
Location: Somerset
Contact:

Post: # 80584Post Dave_L

Yep, I'd go for a 400 too, I run five of the buggers and they are asked to cut a wide variety of materials from tarmac to plastic, all good. Not had a failure for aslong as I can recall.
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset

See what we get up to Our Facebook page

local patios and driveway
Posts: 1568
Joined: Mon May 10, 2010 9:58 pm
Location: Gatwick
Contact:

Post: # 80585Post local patios and driveway

I have a 400, tax man pays for my tools so money no object really...


..... I would still buy a secondhand 400


You decide

GB_Groundworks
Site Admin
Posts: 4420
Joined: Sat Aug 09, 2008 3:55 pm
Location: high peak
Contact:

Post: # 80593Post GB_Groundworks

id try and buy a serviced 400 off a local hire shop if you can be the best way rather than a stolen one off ebay lol
Giles

Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.

http://www.gbgroundworks.com

DNgroundworks
Posts: 1951
Joined: Sat Dec 06, 2008 10:28 pm
Location: Preston, Lancashire

Post: # 80595Post DNgroundworks

I have 2 410's bought over the past two years, never had a problem and they both run sweet as a nut, fully cleaned after every job, airline round the whole thing, airline the air filter, i have heard of lots of folk having problems with them....saying that i had a ts400 before and it was a fecking nightmare lol

Id go for brand new 410, the moment any problems start (if they ever do) go straight back to the dealer :)

rab1
Posts: 1869
Joined: Sun Jun 07, 2009 10:19 pm
Location: scotland

Post: # 80597Post rab1

you could lease on from hilti, not sure of the costs though.
God loves a tryer

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 80602Post lutonlagerlout

DNgroundworks wrote:and they both run sweet as a nut,
daniel my good man
you are learning the lingo of the old east end
diamond geezer!
LLL :laugh:
"what,you want paying today??"

YOUR TEXT GOES HERE

Post Reply