Recent work
-
- Posts: 481
- Joined: Wed Aug 17, 2005 11:55 pm
- Location: glasgow
i wouldnt use instarmac stuff. it is good but £1000 a tonne is ripping the preverbial.
it should be only slightly more expensive than hotmix,as the bitumen content and heat is reduced against a normal recipe,before adding the flux.
the ecoflux stuff,which i thing ronacrete and instarmac use in their mix,sets hard on top fairly quickly,but will still be pliable underneath for a while after its laid.
the problem with these guys,is that they dont have their own tar plant,so a product that costs about £90 a tonne to make ends up,with packaging and marketing at £1000.
just about every plant makes their own version of coldtar,which are all really good these days,its just whether anyone can be ersed to bypass their local b.m
colas do a nice product calle bitucrete,which was about £7 per 25kg last time i bought it.
it should be only slightly more expensive than hotmix,as the bitumen content and heat is reduced against a normal recipe,before adding the flux.
the ecoflux stuff,which i thing ronacrete and instarmac use in their mix,sets hard on top fairly quickly,but will still be pliable underneath for a while after its laid.
the problem with these guys,is that they dont have their own tar plant,so a product that costs about £90 a tonne to make ends up,with packaging and marketing at £1000.
just about every plant makes their own version of coldtar,which are all really good these days,its just whether anyone can be ersed to bypass their local b.m
colas do a nice product calle bitucrete,which was about £7 per 25kg last time i bought it.
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
asphalt express will do me .5 tonne of 6mm for £85 all in
may end up going down that route
pissed off with the hanson stuff ,they shouldnt be allowed to sell it as "driveway repair" cos it aint
screed wacked and rescreeded the sand today
then banged a bit of area in, ohh my hands are sore from picking up the 160 wide blocks
merchant dropped off a inset cover while i was away getting .5 of sand ,I came back and saw a 45 mm cover laying there
some lads need a brain transplant on a Monday, 2 of them looked at me like i was an alien when i asked did they not notice it was too thin for block paving ??
give me strength
meh
LLL
may end up going down that route
pissed off with the hanson stuff ,they shouldnt be allowed to sell it as "driveway repair" cos it aint
screed wacked and rescreeded the sand today
then banged a bit of area in, ohh my hands are sore from picking up the 160 wide blocks
merchant dropped off a inset cover while i was away getting .5 of sand ,I came back and saw a 45 mm cover laying there
some lads need a brain transplant on a Monday, 2 of them looked at me like i was an alien when i asked did they not notice it was too thin for block paving ??
give me strength
meh
LLL
-
- Posts: 1405
- Joined: Thu Sep 27, 2007 10:29 am
- Location: South Wales
- Contact:
-
- Posts: 1405
- Joined: Thu Sep 27, 2007 10:29 am
- Location: South Wales
- Contact:
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Site Admin
- Posts: 4732
- Joined: Fri Jul 28, 2006 8:47 pm
- Location: Somerset
- Contact:
Nice job as always Tone.
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset
See what we get up to Our Facebook page
See what we get up to Our Facebook page
-
- Posts: 1405
- Joined: Thu Sep 27, 2007 10:29 am
- Location: South Wales
- Contact:
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Posts: 1405
- Joined: Thu Sep 27, 2007 10:29 am
- Location: South Wales
- Contact:
-
- Posts: 1405
- Joined: Thu Sep 27, 2007 10:29 am
- Location: South Wales
- Contact:
-
- Site Admin
- Posts: 4732
- Joined: Fri Jul 28, 2006 8:47 pm
- Location: Somerset
- Contact:
All ready for membrane tomorrow when it's a little less breezy and then 150mm of pumped C35 concrete with fibres Thursday.
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset
See what we get up to Our Facebook page
See what we get up to Our Facebook page
-
- Posts: 2504
- Joined: Thu Jul 10, 2003 10:20 pm
- Location: hemel hempstead,herts. 01442 212315
nice job hag. i particularly like the car on the drive!
Dan the Crusher Man
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
-
- Posts: 1405
- Joined: Thu Sep 27, 2007 10:29 am
- Location: South Wales
- Contact:
-
- Posts: 1405
- Joined: Thu Sep 27, 2007 10:29 am
- Location: South Wales
- Contact: