Recent work

haggistini · Post: # 69736Post **haggistini** Wed Oct 26, 2011 5:52 pm

Flatout day today only pointing left and hoof everything outta there tomorrow...

A few dust busters are on the cards tonight!

dig dug dan · Post: # 69737Post **dig dug dan** Wed Oct 26, 2011 5:53 pm

I do like the use of those heavy weights for string lines. better than tying round bricks any day
Must get myself some of those!

haggistini · Post: # 69738Post **haggistini** Wed Oct 26, 2011 6:16 pm

Bit over kill for small runs but they do go as tight bango strings

London Stone Paving · Wed Oct 26, 2011 6:33 pm

Cracking work Hagg's. Nice pattern, shows what can be done with a bit of imagination

Wed Oct 26, 2011 7:01 pm

nice work haggi, pattern is not my cuppa tea but the customer get what they want

where all those kerbs in situ with no pointing in them?
are you using gftk's"millionaire" on that one?
you must have banged down 30M2 there today
nice one
LLL :;):

Wed Oct 26, 2011 9:26 pm

erm hagi i think i spotted one or two + in that patio

hahahaha

haggistini · Post: # 69759Post **haggistini** Thu Oct 27, 2011 3:37 pm

Customer wanted to keep the edging but the pointing had failed so chased it out
Customer designed it
Using gftk 840 brush in type
I gotta get about 30 m2 in a day LLL as i need the practice!

Post: # 69760Post **msh paving** Thu Oct 27, 2011 5:03 pm

looking good haggi...........MSH

cookiewales · Post: # 69766Post **cookiewales** Thu Oct 27, 2011 7:20 pm

msh paving wrote:looking good haggi...........MSH

room for improvement when the cats away the mice will play lol

haggistini · Post: # 69768Post **haggistini** Thu Oct 27, 2011 7:30 pm

Fook off...

Post: # 69772Post **msh paving** Thu Oct 27, 2011 8:33 pm

Todays job,bottom and top RSJ came in at 340kg each, overkill from engineer.....hard work for 2 of us bars and shuvving about

Job is in lewisham SE4 LONDON

last week floor slab for a new micro brewery

started pour 8am,all in by 10.30, power trowel on a 4 pm with pan, last polish at 12 midnight........

Thu Oct 27, 2011 9:23 pm

is that the polymeric one haggi?

LLL does not like polymerics anymore
looks well executed mind, lovin the flags

MSH looks like the engineer had a field day on that one,have done plenty of goalposts before but never with a groundbeam link as well
I love doing all that sort of awkward steel work,
are you drypacking over the steels?
cheers LLL

Bob_A · Post: # 69784Post **Bob_A** Fri Oct 28, 2011 4:36 pm

msh paving wrote:............Job is in lewisham SE4 LONDON

Not too far from me.
Do you do a lot of jobs in London?

Post: # 69792Post **msh paving** Fri Oct 28, 2011 7:47 pm

nope, this is a one off new build bomb blew terrace down in world war 2, commerford road, brockly. back nxt week for 4 weeks

MSH

DNgroundworks · Sat Oct 29, 2011 10:40 am

Ive had a fantastic week, bust a 55mm gas main that ran underneath the length an old wall and then rose up into the old dry stone walling? wtf? so when we pulled the wall over..oops.

The day later after looking at the maps the gas board let us study, we went through another 25mm gas main that was buried 75mm deep in the lawn - couldn't believe it.

The same day whilst excavating foundations we pulled through a tree root about 3/4 of an inch thick, turns out the tree had a preservation order on it.

Never broken anything major before, and all this in the space of a few days.

Lots of lessons learned this week.

PS, i knew the guys on the gas board = freemans repair :p