Recent work
-
- Posts: 2504
- Joined: Thu Jul 10, 2003 10:20 pm
- Location: hemel hempstead,herts. 01442 212315
right. heres the pictures at the end of day four
Footings poured. Crushing done. bricks moved in. Skip full. threshold concreted ready for pavers
the pile of crushed to spread and the leftover readymix
the latest addition to the fleet moving the bricks
comments always welcome:)
Footings poured. Crushing done. bricks moved in. Skip full. threshold concreted ready for pavers
the pile of crushed to spread and the leftover readymix
the latest addition to the fleet moving the bricks
comments always welcome:)
Dan the Crusher Man
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
that is indeed, an identical handler to the guy we use dan
I wont pass any comment on the step footings ,other than to say its obvious it wasnt a bricklayer that laid them :;):
we were 2 cube short today and the ground workers said "we can just step it down"
i said "lets just get another 2 cube"
you have certainly cracked on in a week,I bet the client is happy
LLL
I wont pass any comment on the step footings ,other than to say its obvious it wasnt a bricklayer that laid them :;):
we were 2 cube short today and the ground workers said "we can just step it down"
i said "lets just get another 2 cube"
you have certainly cracked on in a week,I bet the client is happy
LLL
-
- Posts: 2504
- Joined: Thu Jul 10, 2003 10:20 pm
- Location: hemel hempstead,herts. 01442 212315
I wont pass any comment on the step footings ,other than to say its obvious it wasnt a bricklayer that laid them
AH! i am glad you spotted that. Although it doesn't look it,
We VERY carefully set out our footings by banging in metal pins to the height we want using a laser level. Then to mark a step in the footing, we drop in 75mm increments.
All the steps you see are just that 75mm or 150mm. This means when the brickies arrive, they have no problems!
It takes a bit more time and effort to do, and the calcs for the readymix can be harder, but worth it.
We matched up to the old footing that was staying, and stepped it down to suit too!
Dan the Crusher Man
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
i would prefer a nosebleed than 10 steps IYKWIM
but if you did it with the laser then i stand corrected
last pull today
always a last shovel the digger cannot get
and last but not least "tiffles" my chinese crested powder puff blue, a proper man's dog all 3KG of him
all comments etc welcome
11.25 M3 in today,that wall wont be moving
cheers LLL
but if you did it with the laser then i stand corrected
last pull today
always a last shovel the digger cannot get
and last but not least "tiffles" my chinese crested powder puff blue, a proper man's dog all 3KG of him
all comments etc welcome
11.25 M3 in today,that wall wont be moving
cheers LLL
-
- Site Admin
- Posts: 4420
- Joined: Sat Aug 09, 2008 3:55 pm
- Location: high peak
- Contact:
gay dog haha
saffy our 10 st 1.2 metre high irish wolfhound
like the little extension chute for the volumetric, how do you find the mix on the volumetrics had bad experience with poorly mixed crete from them.
dan what strength mix is that c15? id have gone full depth and level let the brickies come up in concrete commons/engineers etc. you not use a timber shutter to get a clean edge on the steps?
what was that before tony? 300mm crete then bricks then more crete? on the pic with the staff that is.
and tony groundworkers are always right haha, not the brickies lol
saffy our 10 st 1.2 metre high irish wolfhound
like the little extension chute for the volumetric, how do you find the mix on the volumetrics had bad experience with poorly mixed crete from them.
dan what strength mix is that c15? id have gone full depth and level let the brickies come up in concrete commons/engineers etc. you not use a timber shutter to get a clean edge on the steps?
what was that before tony? 300mm crete then bricks then more crete? on the pic with the staff that is.
and tony groundworkers are always right haha, not the brickies lol
Giles
Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.
http://www.gbgroundworks.com
Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.
http://www.gbgroundworks.com
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
it was the old foundations we had to break through to get the new depth of 1800 giles :;):
the crowd we use custom concrete work the motorway as well and they only use gravel and grit sand,never all in ballast,as thats where the problems lie
and tiffles would knock your dog out with 1 paw :laugh:
LLL
£7 a month for food, how much does saffi eat?
the crowd we use custom concrete work the motorway as well and they only use gravel and grit sand,never all in ballast,as thats where the problems lie
and tiffles would knock your dog out with 1 paw :laugh:
LLL
£7 a month for food, how much does saffi eat?
-
- Posts: 1951
- Joined: Sat Dec 06, 2008 10:28 pm
- Location: Preston, Lancashire
-
- Posts: 1405
- Joined: Thu Sep 27, 2007 10:29 am
- Location: South Wales
- Contact:
I wouldn't want a bite off either dog as the neck and ankle are quite tender places for K9's to be latched on to ........@ DN I do my own drawings with auto CAD they are only basic but give the customer a good idea what the job will look like and help me to get the quantitys and setting out bang on .
-
- Posts: 2504
- Joined: Thu Jul 10, 2003 10:20 pm
- Location: hemel hempstead,herts. 01442 212315
dan what strength mix is that c15? id have gone full depth and level let the brickies come up in concrete commons/engineers etc. you not use a timber shutter to get a clean edge on the steps?
its gen 1. If i went full depth, its more soil to get rid of, more bricks and more labour. Its only going to be 6 courses high. No need for wooden shuttering when the bricks will just step over them and they are hidden, so thye do not need to be a clean edge.
Dan the Crusher Man
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
I wouldn't describe haggis drawings as basic danhaggistini wrote:I wouldn't want a bite off either dog as the neck and ankle are quite tender places for K9's to be latched on to ........@ DN I do my own drawings with auto CAD they are only basic but give the customer a good idea what the job will look like and help me to get the quantitys and setting out bang on .
they are far far better than your average bloke can do
and as for 6 course walls I have seen them built of a layer of levelled sand due to a book called " the knack" hehe
LLL
-
- Posts: 1405
- Joined: Thu Sep 27, 2007 10:29 am
- Location: South Wales
- Contact:
Thanks tony but they are basic compared to the gaffers I just make sure when I sketch the job out that I take every measurement possible including any angles as they tend to throw you out on the drawing . It's not that difficult to transfer your sketch to cad it just takes time to learn the software . What I find hard is dropping in the detail of slabs and setts
-
- Posts: 1405
- Joined: Thu Sep 27, 2007 10:29 am
- Location: South Wales
- Contact:
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
awesome work haggi
2 things i would pick you up on are no guard on the 100mm cutter and 240 power
danger and double danger
the quality of the cutting is the finest
what did you use to core the holes for the lights?
I had to core some 180mm holes in sandstone a few years ago and it cost an arm and a leg for a special pillar diamond core cutter,mind you the sandstone was 50mm thick in them days
I bet they are happy
LLL
2 things i would pick you up on are no guard on the 100mm cutter and 240 power
danger and double danger
the quality of the cutting is the finest
what did you use to core the holes for the lights?
I had to core some 180mm holes in sandstone a few years ago and it cost an arm and a leg for a special pillar diamond core cutter,mind you the sandstone was 50mm thick in them days
I bet they are happy
LLL
-
- Posts: 1270
- Joined: Mon Aug 10, 2009 8:30 am
- Location: york work anywhere where the stone takes me
- Contact:
a patio to new house in brough east riding was a sloping garden take a browse http://s742.photobucket.com/albums....20tears
Originalstonepaving.com
The very best in natural stone paving in new and reclaimed materials
M: 07968 582231
The very best in natural stone paving in new and reclaimed materials
M: 07968 582231
-
- Posts: 1405
- Joined: Thu Sep 27, 2007 10:29 am
- Location: South Wales
- Contact:
Nice use of timber bigman don't see it enough . Looks the biz are those setts aplenty?
@ LLL yes I have been a bit stupid with the grinder and will need to invest in 110 kit just thought I'd show how I got the cuts done.
The holes were cut with a makita hole kit I needed a 185 mm for uplighters but will have to grind the backs off to get them flush now .. Will put guard back on before something go's bad.
Ps cookie i got a tidy pad for your slab sucker and spare battery!
@ LLL yes I have been a bit stupid with the grinder and will need to invest in 110 kit just thought I'd show how I got the cuts done.
The holes were cut with a makita hole kit I needed a 185 mm for uplighters but will have to grind the backs off to get them flush now .. Will put guard back on before something go's bad.
Ps cookie i got a tidy pad for your slab sucker and spare battery!