Raise dpc or create dry channel? - It looks easier to raise the dpc ....

Other groundworks tasks, such as roads and footpaths, terracing, fencing, foundations, walls and brickwork, tools and plant.
Post Reply
DIY Dad
Posts: 3
Joined: Sun Aug 23, 2009 9:23 pm
Location: London

Post: # 41057Post DIY Dad

Hi there. This site looks really helpful. I would appreciate any advice you could give me on the following.

My house has a patio out the back, which, along about a 3m length by the kitchen, reaches the top of the DPC. This areas stays quite dry, because the patio slopes away from the house, and is further sheltered by fire-exit steps. But I guess it needs sorting out. Looking at this site, I am torn between cutting out a dry channel, and raising the DPC with a DIY damp proofing course.

It looks as if the standard answer would be to make a dry channel. But this will involve removing and cutting the stone slabs and then re-pointing. Easy for some, but a big ask for a novice like myself. By comparison, modern DIY damp-proof courses seem relatively easy - as long as it is done properly, the only skills required seem to be drilling holes along the new line, and filling with DPC cream.

I am okay to go ahead with the DIY damp-proofing? Or are there drawbacks, such as weaking the wall, that I have missed?

Many thanks
DIY Dad

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 41062Post lutonlagerlout

dad those DIY dpcs are a can of worms m8

if there is no sign of water ingress ,why fix it if it aint broke?

i live in a 1922 house and all my thresholds are more or less flush,no water comes in and there is no damp so i leave well alone

LLL
"what,you want paying today??"

YOUR TEXT GOES HERE

Tony McC
Site Admin
Posts: 8346
Joined: Mon Jul 05, 2004 7:27 pm
Location: Warrington, People's Republic of South Lancashire
Contact:

Post: # 41099Post Tony McC

While agreeing in principle with LLL's leave-it-be approach, if something *must* be done, creating a dry channel or installing a linear channel is much, much simpler than effing about trying to elevate the dpc.
Site Agent - Pavingexpert

DIY Dad
Posts: 3
Joined: Sun Aug 23, 2009 9:23 pm
Location: London

Post: # 41109Post DIY Dad

Thanks guys. Much appreciated. Leaving it alone looks a good option. Would there be any point, for extra peace of mind, in waterproofing a layer of bricks above the patio, just to really make sure that moisture will not got through? If so, how would I do this?
DIY Dad

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 41126Post lutonlagerlout

you could install code4 lead 150 above DPC bit unsightly but we have done it for luton borough council ,when no other option was available
or you could use a slate stuck to the wall with mortar mixed with SBR
I know it used to be fashionable to paint liquid waterproofer on to brick work ,but there is a lot of arguments for and against this i.e. stops the brickwork from breathing.

is this something a surveyor has picked up or have you just twigged it yourself?

the choice is yours dad

LLL :)
"what,you want paying today??"

YOUR TEXT GOES HERE

DIY Dad
Posts: 3
Joined: Sun Aug 23, 2009 9:23 pm
Location: London

Post: # 41141Post DIY Dad

Thanks again LLL. The patio is just obviously raised in height (it is higher than the neighbour's), and I have heard a few scare stories about rising damp.

I think I will put this one on the back burner, and focus on my current project - making a mess of the bathroom toilet!



:D
DIY Dad

flowjoe
Posts: 1136
Joined: Sun May 08, 2005 9:25 am
Location: North West

Post: # 41188Post flowjoe

DIY Dad wrote:I think I will put this one on the back burner, and focus on my current project - making a mess of the bathroom toilet!

Aha, a fellow stella drinker :laugh: Cheers !
http://draindomain.com

Many paths can lead to riches, few in sunlight, some in ditches

Post Reply