marshalls heritage

Patio flagstones (slabs), concrete flags, stone flags including yorkstone and imported flagstones.
Post Reply
107-1093880431

Post: # 3633Post 107-1093880431

Hi total new here so stand by for silly questions.... i am thinking of laying a patio using marshalls heritage, but was wondering if they suffer from standing water due to the pattern.
cheers
keith

84-1093879891

Post: # 3635Post 84-1093879891

I think you mean the 'surface texture' rather than the pattern - the fact that they have a heavily riven-like surface. The term "pattern" refers to the layout of the flags, and can be coursed, random, dutch, herringbone etc. However, I know what you mean.

All riven flags do tend to 'pond' slightly after rain. The more heavily riven the texture, the more likely the flag is to hold water. However, if the flags are laid to adequarte falls (1:60 is about the minuimum I'd accept) then any surfcae water retained by the riven surface is minimal and will evaporate or soak away in less than an hour.

This small quanity of short-lived standing water doesn't do any damage: at least, not any that you'd notice with the naked eye over the lifetime of the product, but it can encourage algae to colonise those shadier/damper parts of the flags.

The key point is that the flags must be laid to adequate falls. If they are laid too flat, the standing water issue becomes a big problem.

Incidentally, this phenomenon is exhibited by ALL riven flags, to a greater or lesser degree, not just the Marshalls' Heritage.

107-1093880431

Post: # 3636Post 107-1093880431

cheers Tony. i think the mistake i am making is leaving the marshalls brochure out. the wife is reading it and comming out with even more questions than normal
keith
:-)

84-1093879891

Post: # 3639Post 84-1093879891

As long as she doesn't change your chosen flag, now that I'm halfway through completing the layout design!

Post Reply