Mysterious clicking..... - When it's freezing cold....slabs "click"
-
- Posts: 2
- Joined: Mon Dec 17, 2007 5:22 pm
- Location: Sussex
Hi,
I mailed this question and Tony kindly replied - but I wondered whether any others had experienced this phenomenon (sorry for mailing and now posting):
When it's freezing cold, one or two of my Indian sandstone steps "clicks". I cannot detect any movement whatsoever - so I wondered if it was perhaps some kind of wicking and then internal freezing (or something!) and when I stand on it the stone compresses slightly and causes a "click".......! Or, am I just mad?!
The steps are made of brick risers, sandstone treads, and the sides are supported by Azobe sleepers (again, I wondered if it was the difference in materials and the way they behave when frozen, but I cannot detect any visible signs of movement). It feels, under foot, as if there is a "switch" under the sandstone slab that makes the click, not the actual slab itself rocking. The steps are formed in to a lawn, so there could be moisture present from the grass/soil.....
Having typed this, I am now slightly worried that I am going insane!!
Any input welcome,
Matt
I mailed this question and Tony kindly replied - but I wondered whether any others had experienced this phenomenon (sorry for mailing and now posting):
When it's freezing cold, one or two of my Indian sandstone steps "clicks". I cannot detect any movement whatsoever - so I wondered if it was perhaps some kind of wicking and then internal freezing (or something!) and when I stand on it the stone compresses slightly and causes a "click".......! Or, am I just mad?!
The steps are made of brick risers, sandstone treads, and the sides are supported by Azobe sleepers (again, I wondered if it was the difference in materials and the way they behave when frozen, but I cannot detect any visible signs of movement). It feels, under foot, as if there is a "switch" under the sandstone slab that makes the click, not the actual slab itself rocking. The steps are formed in to a lawn, so there could be moisture present from the grass/soil.....
Having typed this, I am now slightly worried that I am going insane!!
Any input welcome,
Matt
-
- Posts: 884
- Joined: Thu Feb 08, 2007 12:28 pm
- Location: Reading
I haven't noticed it with sandstone but I have with slate. I assumed that there is some degree of delamination in the slab which is sufficiently slim not to be noticeable normally. As long as the pointing is sound and the slab well bedded it's something I wouldn't worry about. In time the slab may well fully delaminate and need to be replaced.
I once did a job with sandstone that the client had bought cheap herself and noticed that some of the slabs were 'flimsy' and could well delaminate in the future. This was of course excluded from the guarantee!
I once did a job with sandstone that the client had bought cheap herself and noticed that some of the slabs were 'flimsy' and could well delaminate in the future. This was of course excluded from the guarantee!
-
- Site Admin
- Posts: 4713
- Joined: Mon Jun 26, 2006 11:01 am
- Location: eastbourne
Air contracts when cold and holds its moisture. obviously it doesn't freeze , or we would all drop dead,. all other gasses are held with the air. I suspect that the energy applied to the the slabs would be enough for the air to expand releasing other gasses thereby causing a click. Its like cracking your knuckles, the knuckles don't actually crack, its just the gas releasing. Who was it said "the world is a triangle?" :p
sean
-
- Posts: 89
- Joined: Sat Oct 06, 2007 3:41 pm
- Location: Hyde, Cheshire
- Contact:
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Posts: 2
- Joined: Mon Dec 17, 2007 5:22 pm
- Location: Sussex
Thanks everyone, I appreciate your replies.
I guess I was thinking more along the lines of the delamination that Rich H mentioned, but I am intrigued by Sean's suggestion!
Sean - do you mean air within the slab (back to delamination?) is having my (considerable!) force applied to it and is expanding and "clicking" (but when the air is warm it cannot / does not expand when said force is applied)?
Either way, since the slab appears to be well bedded and the pointing appears to be absolutely fine I presume I can relax a little and enjoy Christmas.....
Cheers one and all for your time,
Matt
I guess I was thinking more along the lines of the delamination that Rich H mentioned, but I am intrigued by Sean's suggestion!
Sean - do you mean air within the slab (back to delamination?) is having my (considerable!) force applied to it and is expanding and "clicking" (but when the air is warm it cannot / does not expand when said force is applied)?
Either way, since the slab appears to be well bedded and the pointing appears to be absolutely fine I presume I can relax a little and enjoy Christmas.....
Cheers one and all for your time,
Matt
-
- Site Admin
- Posts: 4713
- Joined: Mon Jun 26, 2006 11:01 am
- Location: eastbourne