One of these.......
Bloody hard work as you say!
Free screed tool
Edited By Dave_L on 1196836790
Free screeding - Tools etc for free screeding
-
Dave_L
- Site Admin
- Posts: 4732
- Joined: Fri Jul 28, 2006 8:47 pm
- Location: Somerset
- Contact:
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset
See what we get up to Our Facebook page
See what we get up to Our Facebook page
-
Brerrebate
- Posts: 16
- Joined: Sun Dec 02, 2007 6:26 pm
- Location: France
Thank's for all the replies.
It all starts to get a bit clearer now - thanks sean & dave L.
I think I've been confusing the issues a bit, power float/tamp for wet concrete - would've come in handy today.
Screeding bedding is done as is found on this site ...
That clears tha
It all starts to get a bit clearer now - thanks sean & dave L.
I think I've been confusing the issues a bit, power float/tamp for wet concrete - would've come in handy today.
Screeding bedding is done as is found on this site ...
That clears tha
So much to learn & only one life in which to do it...
-
Brerrebate
- Posts: 16
- Joined: Sun Dec 02, 2007 6:26 pm
- Location: France
...previous post discontinued, after pressing wrong button,
As I was saying, that clears that up.
Stay with the rails and straight edge, then - methinks.
You'll have to excuse my apparent ignorance on all of this, but Block Paving is something I want to get into, but still have a lot to learn.
If all goes well, on some reasonably safe jobs that are lined up, then I'll be enrolling meself on some HLTG courses next year.
Cheers all...
As I was saying, that clears that up.
Stay with the rails and straight edge, then - methinks.
You'll have to excuse my apparent ignorance on all of this, but Block Paving is something I want to get into, but still have a lot to learn.
If all goes well, on some reasonably safe jobs that are lined up, then I'll be enrolling meself on some HLTG courses next year.
Cheers all...
So much to learn & only one life in which to do it...
-
lutonlagerlout
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
holy moly daveDave_L wrote:One of these.......
Bloody hard work as you say!
Free screed tool
them tools are mega bucks!!
i will continue with my trusty 13' scaffold board ,11" float and soft brush for the forseeable
that lot would cost about £5K for all the beams?
LLL :O
-
seanandruby
- Site Admin
- Posts: 4713
- Joined: Mon Jun 26, 2006 11:01 am
- Location: eastbourne