am going to install 350 sq ft of 1.5 inch sawn cut bluestone over roof covered patio in freeze thaw area. Bluestone is of two sizes 18 in x 24 in and 12 in x 18 in. Concrete patio is without cracks and is fairly level with little straight edge deflection. Was considering using 3/4 inch noch trowel to spread heavy bed thinset and to backbutter the stone and set. Then I would point up the joints with a dry mortar.
I had consideredputting down either schluter Ditra or a Blanke membrane prior to stone. Is this necessary?
What is cleanest way to strike off the joints?
Any ideas would be appreciated.
Method bluestone installation - Over sound and true concrete outside pat
-
- Site Admin
- Posts: 8346
- Joined: Mon Jul 05, 2004 7:27 pm
- Location: Warrington, People's Republic of South Lancashire
- Contact: