I'm midway through block paving our driveway and could really use some help. One end of my driveway butts up to our garage, the bottom end has a public footpath running along it at an angle, this is where my problem is, I intend to use an edge course (using normal blocks pavers) along the bottom of the driveway to butt up to the path, however there is a 15 inch difference between the length of the driveway to the path from one side to other, because of this path running along the bottom of the drive at an angle. I intended to cut each block, to take up the difference, keeping the main paving on the drive square but the 15inch difference is too much . Any help or advice would be greatly appreciated.
