Flush invert ic's

Foul and surface water, private drains and public sewers, land drains and soakaways, filter drains and any other ways of getting rid of water.
Post Reply
jwill
Posts: 148
Joined: Mon Feb 08, 2016 6:00 pm
Location: leic

Post: # 117676Post jwill

Are there any restrictions on using these flush invert IC's for foul runs? If I buy a 3 inlet flush invert IC and only use the straight run and one side is that likely to cause blockages or is it acceptable?
Top
Tony McC
Site Admin
Posts: 8346
Joined: Mon Jul 05, 2004 7:27 pm
Location: Warrington, People's Republic of South Lancashire
Contact:
Contact Tony McC

Post: # 117692Post Tony McC

No - but you should stopper-up the unused branches.
Site Agent - Pavingexpert
Top
jwill
Posts: 148
Joined: Mon Feb 08, 2016 6:00 pm
Location: leic

Post: # 117728Post jwill

Got a couple of the OSMA 250mm ones. Not only is the unused branch stoppered but on the inside it has a plastic piece which stops any flow going up the unused branch. Quality stuff.
Also for one of the IC's i've again gone with the OSMA 320mm base but with only 2 inlets 1 straight and 1 90deg. You have to get this the right hand for your job but not going to get any nasty pieces clinging on anywhere they shouldn't
Top
Post Reply

Return to “Drainage”