Posted: Wed Sep 07, 2011 6:01 pm
Hi,
Hopefully someone can help me with this! I've just had a 5.00 x 4.20 concrete slab laid (Last Friday), it has, or should have, a 50mm fall. The problem is that towards the end of the fall there are two areas where rainwater is settling, very shallow admittedly (3-4mm max), but for hygiene reasons I'd rather it didn't as liquids other than water will also settle! Yuk...
I need to know what to tell my builder to do about it, if indeed he can! I'd rather not get into telling him to re-lay the whole slab if poss.
Any advice gratefully received!
Supermoto
Hopefully someone can help me with this! I've just had a 5.00 x 4.20 concrete slab laid (Last Friday), it has, or should have, a 50mm fall. The problem is that towards the end of the fall there are two areas where rainwater is settling, very shallow admittedly (3-4mm max), but for hygiene reasons I'd rather it didn't as liquids other than water will also settle! Yuk...
I need to know what to tell my builder to do about it, if indeed he can! I'd rather not get into telling him to re-lay the whole slab if poss.
Any advice gratefully received!
Supermoto