Page 1 of 1
Posted: Sun Aug 07, 2011 9:57 am
by haggistini
Any advice on slate cladding I will be fixing it to a block wall it needs to be real slate in precast block if you know what i mean!! not the precast type and what adhesive should be used? The wall will be an L shape 6Mx6Mx2M with up lighters for effect
Posted: Sun Aug 07, 2011 7:41 pm
by Pablo
Is this what you're after I can highly recommend it. I usually pay around £35 a m2 for it but you could do your wall with it in a morning. I've used a few adhesives but the cheapest one is a cement water and sbr paste applied with a tiling trowel. It sticks very well indeed. Z stone do their own adhesive also but it's not cheap. I think London stone do some similar stuff.
http://www.lbsproducts.com/z_stone.html
Posted: Sun Aug 07, 2011 9:57 pm
by haggistini
Top man I'm on it.