Page 1 of 1
Posted: Tue Jun 02, 2009 8:30 pm
by rimexboy
Hi all i have looked on the main site and found how to lay a circle kit and have read it,
but my question is as follows is their a search on the forum i can do to see if any one else has posted any thing about laying a circle kit?
if so please can some one point me into the right direction.
many thanks simon
Posted: Tue Jun 02, 2009 8:51 pm
by Tommy
Go back to the main forum page, Top right hand corner, above the green bars is 3 icons. Search, Members & Help?
Click search, and away you go.
Posted: Tue Jun 02, 2009 10:13 pm
by Rich H
Do it dry first. Middle circular slab then each row. Once you're happy with how it all fits, you're ready to turn on the mixer and do it again with muck.
Posted: Fri Jun 05, 2009 1:22 pm
by richie_jones
its also best to lay it in one day, so you can jiggle bits about as you need to. Did mine over 2 days and regretted it, could of done with moving a few about to even up the joint lines.....Never mind out came the grinder....
Posted: Sat Jun 06, 2009 7:54 am
by rimexboy
Hi all sorry its taken some time to get back to you, back at work now, many thanks for that, i have currently laid the circle kit out and got the spaces i want, the centre circle i will not be using as putting in a pebble pond.
Its currently laid out on my lawn, and i have measured it out on the patio and cut it out just waiting for a days break in the weather...
many thanks again
simon