The Brew Cabin

Posted: **Tue Mar 01, 2011 10:19 pm**

Just pricing an 87m set job using the big buggers trying to work out the jointing. romex I've done, now investigating easipoint

Anyone know the coverage for setts roughly 20-30mm joint width 50-70 depth.

Typicall unit size 250x150 average

And what does it cost per bag? thinking black colour and how much can you fire in a day and joint?

Read the data sheets but not much info
Any other suggestions gents? Pitch or cement slurry then intense clean?

Easipoint do settpoint which is a slurry type mortar poured in out of a can? Anyone used it?

Edited By GB_Groundworks on 1299018149

Posted: **Wed Mar 02, 2011 2:33 am**

easipoint can estimate for you giles the same with instarmac,I would have thought messr.cookie would be the man to ask though :;):
cheers LLL

Posted: **Wed Mar 02, 2011 10:20 pm**

i was texting him a lot hehe but hed gome to bed but got a reply this am

mr cookie is the boyo shame about us kicking their bum at rugby

Edited By GB_Groundworks on 1299104465

Posted: **Thu Mar 03, 2011 7:39 pm**

we used easipoint granotech for slurry pointing our setts in the west end .its basically mix with a paddle pour on . squeegy all around and then squeegy as much of it off as possible . spraying a fine mist on setts . then use belt cleaner on setts . sponge edges belt cleaner cant get . the guys used to do about 30 m a day . this stuff goes off like iron . buses etc have no effect on it .

The Brew Cabin

Setts