Posted: Tue Jul 14, 2020 9:14 am
Hi all, new to this forum. Just about to undertake laying some sandstone paving, but first need to sort out a few issues with drainage and other pipe works.
One question is that I have 2 underfloor pipes from an air tight stove which emerge outside at or around the proposed paving level. They are currently capped with a standard 110mm Ring Seal Vent Terminal, which is not very suitable when at ground level.
Just wondering if I can use a air admittance valve on these or what other options there are? The stove is rarely used, but would still like to keep it operational.
Thanks, Liam.
One question is that I have 2 underfloor pipes from an air tight stove which emerge outside at or around the proposed paving level. They are currently capped with a standard 110mm Ring Seal Vent Terminal, which is not very suitable when at ground level.
Just wondering if I can use a air admittance valve on these or what other options there are? The stove is rarely used, but would still like to keep it operational.
Thanks, Liam.