Featheredge fencing - Quick one ..

Other groundworks tasks, such as roads and footpaths, terracing, fencing, foundations, walls and brickwork, tools and plant.
Post Reply
GandA
Posts: 12
Joined: Tue Sep 04, 2018 5:43 pm
Location: Lincolnshire

Post: # 116911Post GandA

Just wondered people's views on nailing it up ..
First Fix nailer for the ring nails and better hold...
Or 2nd fix for a less noticeable finish??

dig dug dan
Posts: 2504
Joined: Thu Jul 10, 2003 10:20 pm
Location: hemel hempstead,herts. 01442 212315

Post: # 116912Post dig dug dan

I use a pneumatic coil nailer, fires 45mm ring nails. Forget paslode, far too expensive use of nails, you have to reload it to often
Dan the Crusher Man
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"

GandA
Posts: 12
Joined: Tue Sep 04, 2018 5:43 pm
Location: Lincolnshire

Post: # 116913Post GandA

Cool thanks for quick reply .. so that's something more 1st fix size not pins ..
Iv seen people using both , but i just use the tools supplied .. can't tell the bloke I work with anything :rock:

Always thought proper ring nails be best .. doing this job for myself and want it to last! Lol

lutonlagerlout
Site Admin
Posts: 15182
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 116915Post lutonlagerlout

I see a lot of fencers jut using nails and a hammer
no gas power leads etc.
LLL
"what,you want paying today??"

YOUR TEXT GOES HERE

dig dug dan
Posts: 2504
Joined: Thu Jul 10, 2003 10:20 pm
Location: hemel hempstead,herts. 01442 212315

Post: # 116916Post dig dug dan

GandA wrote:Cool thanks for quick reply .. so that's something more 1st fix size not pins ..
Iv seen people using both , but i just use the tools supplied .. can't tell the bloke I work with anything :rock:

Always thought proper ring nails be best .. doing this job for myself and want it to last! Lol
I am currently working on a project at a local village shop, doing all the landscaping. About 25 years ago, when i was just starting out, the then shop owner got me to put up fencing, using concrete morticed posts and fetheredge.
Back then, i brought a compressor and a brad nailer for nailing up the fetheredge. Amazingly, the fencing is still original and still fixed together well considering the brads are not designed for such a task.
The gravel boards are rotting, but the rest is still spot on!
Dan the Crusher Man
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"

lutonlagerlout
Site Admin
Posts: 15182
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 116923Post lutonlagerlout

nice to get repeat stuff like that Dan :)
LLL
"what,you want paying today??"

YOUR TEXT GOES HERE

GandA
Posts: 12
Joined: Tue Sep 04, 2018 5:43 pm
Location: Lincolnshire

Post: # 116933Post GandA

That was my thoughts with the brads not been.ideal for the job ... well put together !! Haha
Could do it all by hand, but it's a time saver with gun .. and it's something il need in the future down the line.

Forestboy1978
Posts: 1000
Joined: Sun Oct 23, 2011 9:57 am
Location: southampton, hampshire

Post: # 116934Post Forestboy1978

first fix 49-52mm threaded galvanised nails without exception.

Hammer and nail them if you can do a 10ft bay in less than 4 1/2 mins by that method.

lutonlagerlout
Site Admin
Posts: 15182
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 116936Post lutonlagerlout

I have seen Mark Naseby do 16 bays in 4 hours with a hammer and nails,and still there
LLL
"what,you want paying today??"

YOUR TEXT GOES HERE

Forestboy1978
Posts: 1000
Joined: Sun Oct 23, 2011 9:57 am
Location: southampton, hampshire

Post: # 116942Post Forestboy1978

lutonlagerlout wrote:I have seen Mark Naseby do 16 bays in 4 hours with a hammer and nails,and still there
LLL
It would probably take me a long day to equal that with a hammer and nails. Perhaps more.

Good nail gun though and I'd destroy it. Probably by half.

GandA
Posts: 12
Joined: Tue Sep 04, 2018 5:43 pm
Location: Lincolnshire

Post: # 116943Post GandA

Cheers Forest ..

Post Reply