I would like to fill in an old pond in the Garden its 4mx2mx0.8m. Ive removed the liner and the hole sides seem to be clay up to about 300mm from the top. I was thinking of filling bottom with some sandstone blocks i have from an old building,Would this be ok and what would you recommend for the rest of the hole.I would like to finish with top soil then I can turf.
Thanks for any advice.
Pond filling materials
-
- Site Admin
- Posts: 4732
- Joined: Fri Jul 28, 2006 8:47 pm
- Location: Somerset
- Contact:
Fill yer boots with whatever fill you like over the first 500mm then make sure it is nicely compacted then subsoil/topsoil over the top bish bash bosh job done :p
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset
See what we get up to Our Facebook page
See what we get up to Our Facebook page