The Brew Cabin

Posted: **Wed Apr 14, 2010 3:54 pm**

hi

can you use resin bonded gravel to fill the joins inbetween paving slabs. I have one joints at the moment with loose gravel but it gets very dirty.

thanks for any help

gjb

Posted: **Wed Apr 14, 2010 5:37 pm**

hoover out the gravel and point it with some mortar
LLL

Posted: **Wed Apr 14, 2010 11:17 pm**

I like the look of the gravel. the joints were left larger than for mortar and it would look crap with mortar.

I assume that the principle of filling joints with resin bonded gravel is feasible or am I a lunatic.

thanks

Posted: **Wed Apr 14, 2010 11:48 pm**

I am sure simeon will come and advise you properly bit if you google ronacrete
I am sure they do some kind of resin to suit your application
cheers
LLL

Posted: **Thu Apr 15, 2010 10:03 am**

Thanks I will Google ronacrete

Posted: **Mon Apr 19, 2010 11:54 am**

Hi GJB

Resin bonded aggregate such as Ronadeck Fast Grip must be laid on to a sound base such as concrete or quality tarmac; it's only a few mm thick (or thin) so must be glued onto something which itself won't move and is strong enough.

Please give us a call to discuss.

The Brew Cabin

Resin bonded gravel