Page 1 of 1

Posted: Sun May 14, 2006 7:31 pm
by BerniS
I am a little confused. I wish to use slate in an area of my garden as a cover to make the gardening easier with stepping stones through as a path. However there seems to be a huge discrepancy in price between two main suppliers in my area.

The area to be covered is approximately 10m2 and I am going to put down infill to level the area off before finishing with slate. I have estimated I will need a one tonne bag of each.

One supplier has quoted £40 for 20mm to dust and £127.30 for the slate 20mm. The other, who I must say was less helpful, quoted £30 for scalpings and £65 for ungraded slate it looks up to 40mm plus from the sample I have seen.

Quite a difference in price but are we talking apples and apples and is the large size slate suitable for use as described.

Posted: Thu May 18, 2006 8:16 pm
by Tony McC
Avoid the 20mm to dust - it will choke your garden. Scalpings are usually ungraded, so I can't figure out what distinction your supplier makes between the two. If you can get 40-20mm clean, that is ideal as a garden mulch.

Posted: Fri May 19, 2006 6:06 pm
by BerniS
Thanks for the advice Tony I have gone ahead and ordered scalpings and 40mm slate.