Screws for featheredge fence? - Featheredge fence & drywall screws

Other groundworks tasks, such as roads and footpaths, terracing, fencing, foundations, walls and brickwork, tools and plant.
Post Reply
MsCabbage
Posts: 8
Joined: Mon Feb 21, 2005 11:26 pm
Location: Nr Bridgend, Wales

Post: # 7720Post MsCabbage

I have got about 60M of featheredge fence to put up this summer and decided to go for 38mm screws instead of nails for extra grip and ability to undo mistakes :p .

Thing is I thought outside - so use stainless steel screws - but they add nearly £1.50 to each 1.8m section - eek. However, if I use those black drywall screws it only costs pennies. I figured as plaster is wet the little blighters must be rust resistant? Even if they are a very poor relative of its stainless cousin, surely it kicks the ass of a regular nail?

Is this a reasonable idea or is it dum for some reason I am not aware of?

One day I will get the courage to reply to someone else's post - I certainly read a lot of them!

alan ditchfield
Posts: 203
Joined: Thu Jan 01, 1970 1:00 am
Location: Preston / Lancashire

Post: # 7722Post alan ditchfield

Personally i would stick with ribbed grip nails, firstly the job will look tidier as they are not as visible as screws, secondly you are likeley to split the boards with screws and you will find it a lot cheaper, faster and just as strong using the nails.

Tool
Posts: 48
Joined: Sat Jan 22, 2005 1:37 pm
Location: Isle of Man

Post: # 7728Post Tool

i screw everything personally the hammer and nails went out with noah.

i use two drills, one with a drill bit in the other with the screw driver bit.

or you could buy a flip driver if you only have one drill.

Go for a external screw you will need a 4/35 or a 4.5/38.

The only time i use a hammer these days is knocking in noggins when i am decking.

my m8 who is a joiner said his has gone rusty lol.

dig dug dan
Posts: 2504
Joined: Thu Jul 10, 2003 10:20 pm
Location: hemel hempstead,herts. 01442 212315

Post: # 7731Post dig dug dan

Hammer and nails may be dead, but the compressed air nailgun isn't!
I use one, coupled to a portable compressor, that fires 2" ring nails. Using this method, I can nail up a 3m section of closeboarded in around 5 minutes.
This method allows the nail head to sink in slightly making it almost impossible to prize off the board.
Screws wont be any stronger, they are more expensive, but if you have plenty of time, why not. You needn't worry about mistakes, if you are careful, and use a level at regular intervals, you cant get it wrong.
the hammer and nails are not dead,They're just semi-retired! :;):
Dan the Crusher Man
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"

MsCabbage
Posts: 8
Joined: Mon Feb 21, 2005 11:26 pm
Location: Nr Bridgend, Wales

Post: # 7733Post MsCabbage

Gosh! - A war has started between 'The Screw' and the 'The Nail'

Thanks for the input all!

Tony McC
Site Admin
Posts: 8346
Joined: Mon Jul 05, 2004 7:27 pm
Location: Warrington, People's Republic of South Lancashire
Contact:

Post: # 7807Post Tony McC

As much as I enjoy a good screw, I have to admit to being a nail man when it comes to fences.

It's a fence, for chrissakes! There's more important things to be doing!
Site Agent - Pavingexpert

Post Reply