Page 1 of 1
Posted: Wed Feb 23, 2005 3:01 pm
by jones2004
I want to extend a tarmac path and would like to use a jointing compund between the old and the new. Is there a tape like the ones you can get for yellow lines which you can just place over the joint and heat to adhere to the old and new tarmac as I find using liquid bitumen untidy.
Posted: Wed Feb 23, 2005 4:01 pm
by Tony McC
None that I'm aware of. If there is one, it'd probably be a Colas product. Check their website.
You could always try masking off the joint and then apply the cold pour jointing compound.
Posted: Wed Feb 23, 2005 5:27 pm
by jones2004
Ive found it!! burdens supply a bitumen tape which you place over the joint and heat up to seal.
Thanks for your help
Posted: Wed Feb 23, 2005 8:08 pm
by Tony McC
Have you got a reference for it? I was speaking with Burdens sales manager only yesterday - although we were actually discussing geo-technical applications.
Posted: Wed Feb 23, 2005 8:37 pm
by jones2004
I never thought to ask for a reference number but i spoke to burdens, warrington. Ill ring them again tomorrow for ref and ill post it.
Posted: Wed Feb 23, 2005 10:09 pm
by Tony McC
Ask them to send the details to me here in Culcheth (Warrington is a small village on the outskirts of Culcheth.) Tell them Adi Day in Bristol will OK it, if there's any problem.
Posted: Thu Feb 24, 2005 11:02 am
by jones2004
Its called overbanding tape, it come in 10m lengths, 30 - 50mm wide and 2 - 4mm thick.
No reference number.
Ive contacted denso to get product and application info but their product is for cold lay.
Posted: Thu Feb 24, 2005 2:29 pm
by Tony McC
Denso! I should've known! We've used that dozens of times and for some reason my mind went blank.
Funnily enough we found an unopened roll of Denso on one of John Higgins's jobs in Widnes last week!
Posted: Thu Feb 24, 2005 2:57 pm
by jones2004
So what do you think of the stuff is it worth using??
Posted: Thu Feb 24, 2005 5:20 pm
by Tony McC
Yes - it's vastly more expensive than cold pour, which is why it's rarely used for commercial projects, but it is a lot neater.