The Brew Cabin

Posted: **Sun Apr 01, 2018 1:14 pm**

Hi - I am connecting into my existing surface water drainage for a patio. I've put in my tee junction into the existing 110mm pipe and to connect into it I need to take a bend which is less than 15 degrees. How best to do this? I can't quite just bend the pipe and if I put in a 15 degree bend I have the same problem the other way.

What is the best thing to do?

Thanks,
Dan

Posted: **Sun Apr 01, 2018 9:41 pm**

Use an 11 1/4 easy bend or if you have the depth use an adjustable bend. Think Brett Martin do 11 1/4 easy.

Posted: **Mon Apr 02, 2018 5:46 pm**

Thanks.

The Brew Cabin

Bend less than 15 degrees - How to deal with small bend