Page 1 of 1
Posted: Mon Aug 07, 2017 5:11 pm
by Handyandi
I have a cover that is partly covered by a timber building & it is a pain to get it moved to lift the full cover. Does anyone know of a 2 part cover where one part can be lifted for access. Standard 600x450 pavior cover is in place at the moment. It's in a patio so load bearing is not too much of an issue.
Posted: Mon Aug 07, 2017 5:56 pm
by dig dug dan
Not understanding you correctly, but cant you have an access cover within the wooden building?
Why do you need to keep accessing it?
Posted: Mon Aug 07, 2017 8:39 pm
by Handyandi
At the moment I may have a blocked sewer system & only half of the cover is accessible as currently a playhouse is sitting on the other half. I would need to cut out part of the doorway, porch & floor. We have had 3 blockages in 5 years with 2 in the last 18 months & may want to replace the playhouse with a more substantially built summer house & don't really want to cut the side & floor out. Its in a really tiny back garden. Having a 2 part cover would allow the uncovered part to be lifted. Hope this makes sense.
Posted: Mon Aug 07, 2017 8:52 pm
by dig dug dan
Ah right, I understand now.
I would suggest getting a block paving cover modified by a local blacksmith get him to make it into two, so you can effectively lift out onehalf, while the other half stays put.
not aware of another way
Posted: Mon Aug 07, 2017 8:57 pm
by Handyandi
Great, many thanks.
Posted: Tue Aug 08, 2017 10:21 am
by seanandruby
Would a slide in out cover work. Can get one for about £70ish?