Posted: Wed Mar 08, 2017 4:30 pm
Hi,
New to the forum but long term site user!
I'm about to install new en suite and need to tap into my existing drainage.
My question is: can I tap into the drainage line and install a 300mm inspection chamber and then connect the new soil pipe directly into it, and would that need to be trapped or can I just use a slow 90degree bend?
Cheers
New to the forum but long term site user!
I'm about to install new en suite and need to tap into my existing drainage.
My question is: can I tap into the drainage line and install a 300mm inspection chamber and then connect the new soil pipe directly into it, and would that need to be trapped or can I just use a slow 90degree bend?
Cheers
