Discharge into watercourse

Foul and surface water, private drains and public sewers, land drains and soakaways, filter drains and any other ways of getting rid of water.
Post Reply
Donk
Posts: 28
Joined: Wed Aug 31, 2016 6:18 am
Location: Worcester

Post: # 111132Post Donk

Linked to my gabion topic , the site is quite narrow and we definitely don not have space to be 5m away from the building to build a soakaway per building regs.

I think the best option is to drain the roof and drive into the watercourse. I've checked with the EA and they say no permission required.

Is there an accepted method to terminate the drain into a watercourse ? don't really want the pipe to just poke out the side of the ditch!

thanks

seanandruby
Site Admin
Posts: 4713
Joined: Mon Jun 26, 2006 11:01 am
Location: eastbourne

Post: # 111137Post seanandruby

Look under riparian ownership first.
sean

GB_Groundworks
Site Admin
Posts: 4420
Joined: Sat Aug 09, 2008 3:55 pm
Location: high peak
Contact:

Post: # 111152Post GB_Groundworks

you'll need to build a stone/concrete headwall where your discharge is there is a page on them on the main site but I'm struggling to find it and i know its there

found it scroll down to outfalls

http://www.pavingexpert.com/drain03.htm




Edited By GB_Groundworks on 1472931338
Giles

Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.

http://www.gbgroundworks.com

Donk
Posts: 28
Joined: Wed Aug 31, 2016 6:18 am
Location: Worcester

Post: # 111155Post Donk

thanks just what I was after.

seanandruby
Site Admin
Posts: 4713
Joined: Mon Jun 26, 2006 11:01 am
Location: eastbourne

Post: # 111158Post seanandruby

Ourfalls are quite labour intensive with shuttering. On a "tiddly one " i'd place a base with starter bars and construct the walls with concrete filled sand bags.
sean

GB_Groundworks
Site Admin
Posts: 4420
Joined: Sat Aug 09, 2008 3:55 pm
Location: high peak
Contact:

Post: # 111167Post GB_Groundworks

an athalon precast headwall for a 350mm pipe is roughly £1000 +vat priced a load of them the other day
Giles

Groundworks and Equestrian specialists, prestige new builds and sports pitches. High Peak, Cheshire, South Yorkshire area.

http://www.gbgroundworks.com

Donk
Posts: 28
Joined: Wed Aug 31, 2016 6:18 am
Location: Worcester

Post: # 111168Post Donk

As this is a small one using 110mm pipe, we'll do some 'ground chippying' to shutter it. Probably use engineer bricks to face it.

Dave_L
Site Admin
Posts: 4732
Joined: Fri Jul 28, 2006 8:47 pm
Location: Somerset
Contact:

Post: # 111172Post Dave_L

Agree - no need to get carried away with it.
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset

See what we get up to Our Facebook page

Post Reply