Posted: Thu Apr 30, 2015 7:51 am
Hi,
I've decided to put a channel drain around my conservatory at home because the water tends to gather. I have dug a trench and have purchased 20m of Clark Polymer Concrete Channel Drain (12cm wide, 9cm deep, 1m length).
I am struggling to work out how to mitre the corners as the conservatory is a 'half-hexagon' shape (Is has two straight sides coming away from the house, then two angled sides and finally a straight front).
Can anyone give me any tips on how to mark the joints at the corners? I've read you have to do a cut on both ends but could do with some advice.
Many thanks,
Matt
I've decided to put a channel drain around my conservatory at home because the water tends to gather. I have dug a trench and have purchased 20m of Clark Polymer Concrete Channel Drain (12cm wide, 9cm deep, 1m length).
I am struggling to work out how to mitre the corners as the conservatory is a 'half-hexagon' shape (Is has two straight sides coming away from the house, then two angled sides and finally a straight front).
Can anyone give me any tips on how to mark the joints at the corners? I've read you have to do a cut on both ends but could do with some advice.
Many thanks,
Matt