The Brew Cabin

Posted: **Thu May 01, 2014 9:06 am**

Hi, I've got a problem with trying to find a linear drain that has a end union cap outlet that allows me to connect to a top water gully. I only seem to be able to find end caps that are soakaway's. I'm trying to avoid a vertical 110 outlet as I'm very limited for space and I would prefer to utilise the existing system.

Does anyone know of a linear drain system with and end cap outlet to fit to a gully and where I can get it from?

Any help would be much appreciated. I'm going round in circles pulling what little hair out that I have!!

Cheers.

Posted: **Thu May 01, 2014 9:52 am**

The Aco RainDrain polymer concrete system has an end-cap with a horizontal outlet....

Posted: **Fri May 02, 2014 3:30 pm**

They're expensive! I tend to cut into the side of a gulley instead.

Posted: **Fri May 02, 2014 4:24 pm**

some of the black plastic ones we use have a 110mm connection on the end as well as underneath
LLL

Posted: **Fri May 02, 2014 6:28 pm**

homemade set out of concrete catchpit style thing and option?

Posted: **Wed May 07, 2014 3:36 pm**

Dave_L wrote:They're expensive!

8.25 quid plus VAT, I paid.

OK, so it's hard to justify 8-and-a-bit quid for a slice of plasttic pipe and a half-trowelful of polmer concrete, but I thought it wasn't too bad and much neater than gobbing-up the end of a channel with mortar and setting a short rocker into it.

The Brew Cabin

Linear drainage - Connection to top water